Replacement parts for WARN's ATV Halogen Trail Lights and Backup Lights

Replacement Winch Tie Rod Pins

Replacement Rubber Boot for Rocker Switch with Bar Mount

Relay 12V 30AMP

WARN ATV hook with safety latch. Includes hook strap.

Wire rope, through use, will develop "barbs" which can slice skin. It is extremely important to wear protective gloves while operating the winch or handling the wire rope.
Leather/cotton construction.

For the A2000 winch.
Power-interrupt solenoid only allows the winch to be used if the ignition is on.

1" x 8' (25.4mm x 2.438m) load strap, designed to protect a tree trunk from the damage a wire rope might cause.
Designed for ATV use only.

Don't let a great day of riding or work with ATV end at dusk.
Warn's Backup Light combines durable, high-impact construction.
Created especially for ATVs, the WARN ATV Backup Light has a lens design that achieves a 110-degree beam spread from side to side and 70-degree vertical beam spread. The result is a field of illumination wider and higher than factory-installed ATV lights.
The ATV Backup Light features a 35-watt battery saving H3 Halogen bulbs with 400 candlepower, a stamped steel, powder-coated body and glass lens that withstands heat and thermal shock.
The light uses a completely adjustable universal light mounting bracket that allows for easy installation, and come with a wiring harness.
Designed for ATV use, the light comes with a water-resistant switch and all the necessary mounting hardware.
Backup light is activated whenever the ATV is in reverse.

Save $1.10 when you order today!

50' Wire for Alum or Steel drums.
Aircraft grade wire rope, galvanized to help resist corrosion. Includes swaged loop on one end.

Save $1.10 when you order today!

Switch with mounting hardware.

Handle bar mounted control.
Includes switch and mounting hardware.

Reduces excessive wear on your winch cable or wire rope and aids in angled pulls.

Application	MFG #
All WARN mounting brackets, except those below	28929
Honda TRX 300	29268
Yamaha Big Bear	29257

Warn builds durable, long lasting mounting systems for nearly every ATV on the trail. To optimize the performance of your Warn winch, each system is custom designed to fit a specific ATV model. Not 1 style fits all. The mounts are laser-cut for durability. Plus, you get all the necessary hardware for easy installation.

Application Chart
Model	Year	Part #
YFB250 Timberwolf 2x4/4x4	92-00	WMYA-1 (May not fit 3.0CI winch. Mount modification may be required.)
YFB250 Beartracker 2x4	98-03	WMYA-2
YFM350 Big Bear 2x4	87-96	WMYA-3 (May not fit 3.0CI winch. Mount modification may be required.)
YFM350 Big Bear 2x4	97-98	WMYA-3 (May not fit 3.0CI winch. Mount modification may be required.)
YFM350 Big Bear 2x4/4x4	97-99	WMYA-4 (May not fit 3.0CI winch. Mount modification may be required.)
YFM350 Wolverine 4x4	95-03	WMYA-5 (Not compatible with 3.0CI winch.)
YFM400 Big Bear 2x4/4x4	00-03	WMYA-6
Big Bear Professional 4x4	00-01	WMYA-7
Big Bear SE 350 4x4	96-99	WMYA-8
YFM400 Kodiak 4x4	93-95	WMYA-9
YFM400 Kodiak 4x4	96-98	WMYA-8
YFM400 Kodiak 4x4	1999	WMYA-10
YFM400 Kodiak 4x4	01-02	WMYA-7
YFM400/450 2x4/4x4	2003	WMYA-11
YFM600 Grizzly	98-01	WMYA-12
YFM660 Grizzly	02-03	WMYA-13

All Warn winch mounting systems are engineered to fit the winch under the hood out of harms way, and distribute the loads throughout the ATVs frame. This minimizes the possibility of changing the alignment of your ATV.

Yamaha	Year	MFG #
Grizzly 660 4x4 Auto	02-04	65098
Grizzly 600 4x4	98-01	36693
Kodiak 450 4x4 Auto	03-04	63945
Kodiak 400 2x4, 4x4 Auto	03-04	63945
Kodiak 400 4x4 Auto	00-02	60170
Kodiak 400 4x4	99	39103#
Kodiak 400 4x4 Auto	96-98	32659#
Kodiak 400 4x4 Auto	93-95	29203#
Big Bear Professional 4x4	00-01	60170
Big Bear 400 2x4, 4x4	00-04	60272
Big Bear SE 350 4x4	96-99	32659#
Big Bear 350 4x4	97-99	35274#
Big Bear 350 2x4, 4x4	87-96	28876#
Big Bear 350 2x4	99	35274#
Big Bear 350 2x4	97-98	28876#
Bruin 350 2x4, 4x4 Auto	04	68366
Wolverine 350 4x4	95-04	38581*
BearTracker 250 2x4	98-04	39439
Timberwolf 250 2x4, 4x4	92-00	31004#
*Not compatible with 3.0ci winch. #May not fit 3.0ci winch. Mount modification may be required.

Made of durable nylon-backed vinyl, cover keeps winch looking like new.
Holds securely to winch with elastic cord fasteners.
Fits either the 2000 or 2500 series winches

Save $1.94 when you order today!
Warn builds durable, long lasting mounting systems for nearly every ATV on the trail. To optimize the performance of your Warn winch, each system is custom designed to fit a specific ATV model. Not 1 style fits all. The mounts are laser-cut for durability. Plus, you get all the necessary hardware for easy installation.

Application Chart
Model	Year	Part #
250 2x4	99-01	WMAC-1
250 4x4	2001	WMAC-1
250 2x4/4x4	02-03	WMAC-2
300 2x4/4x4	98-01	WMAC-1
300 2x4/4x4	02-03	WMAC-2
375 Auto 2x4/4x4	2002	WMAC-2
400 2x4/4x4	98-01	WMAC-1
400/400i 2x4/4x4	2002	WMAC-2
400/400 Auto 2x4/4x4	2003	WMAC-2
400 Auto ACT/MRP 4x4	2003	WMAC-2
500/500 Auto/500i/500i Auto 4x4	2002	WMAC-2
500 Auto TBX 4x4	02-03	WMAC-2
500/500Auto /500 Auto MRP 4x4	2003	WMAC-2

Save $1.94 when you order today!
Warn builds durable, long lasting mounting systems for nearly every ATV on the trail. To optimize the performance of your Warn winch, each system is custom designed to fit a specific ATV model. Not 1 style fits all. The mounts are laser-cut for durability. Plus, you get all the necessary hardware for easy installation.

Application Chart
Model	Year	Part #
Traxter	99-03	WMAC-1 (2.5CI Winch Only)
Traxter	99-03	WMAC-2 (3.0CI Winch Only)
Traxter XL 4x4	01-03	WMAC-1 (2.5CI Winch Only)
Traxter XL 4x4	01-03	WMAC-2 (3.0CI Winch Only)
Outlander 330/400	2003	WMAC-3
Quest 500 4x4	01-03	WMAC-1 (2.5CI Winch Only)
Quest 500 4x4	01-03	WMAC-2 (3.0CI Winch Only)
Quest 500 XL 4x4	2002	WMAC-1 (2.5CI Winch Only)
Quest 500 XL 4x4	2002	WMAC-2 (3.0CI Winch Only)
Quest 500 XT 4x4	2003	WMAC-1 (2.5CI Winch Only)
Quest 500 XT 4x4	2003	WMAC-2 (3.0CI Winch Only)
Quest 650/650 XT 4x4	01-03	WMAC-1 (2.5CI Winch Only)
Quest 650/650 XT 4x4	01-03	WMAC-2 (3.0CI Winch Only)
Quest 650 4x4	2002	WMAC-1 (2.5CI Winch Only)
Quest 650 4x4	2002	WMAC-2 (3.0CI Winch Only)

Save $1.94 when you order today!
Warn builds durable, long lasting mounting systems for nearly every ATV on the trail. To optimize the performance of your Warn winch, each system is custom designed to fit a specific ATV model. Not 1 style fits all. The mounts are laser-cut for durability. Plus, you get all the necessary hardware for easy installation.

Application Chart
Model	Year	Part #
P250 Xplorer 4x4	00-02	WMPO-1 (Not compatible with 3.0CI winch)
P250 Trail Boss 2x4	93-99	WMPO-2
P300 Xplorer	96-99	WMPO-3
P325 Xpedition 4x4	01-02	WMPO-3
P325 Magnum 2x4	00-02	WMPO-4 (Not compatible with 3.0CI winch)
P325 Magnum 4x4	00-02	WMPO-3
P325 Trail Boss 2x4	00-01	WMPO-1 (Not compatible with 3.0CI winch)
P300 Xpress 2x4	97-99	WMPO-5 (May not fit 3.0CI winch. Mount modification may be required)
P330 Magnum 2x4	2003	WMPO-4 (Not compatible with 3.0CI winch)
P330 Magnum 4x4	2003	WMPO-3
P335 Sportsman 4x4	98-00	WMPO-3
P400L Big Boss 6x6	93-99	WMPO-6 (Not compatible with 3.0CI winch)
P400 Scrambler 2x4/4x4	99-03	WMPO-7 (Not compatible with 3.0CI winch)
P400 Sportsman	01-03	WMPO-3
P400 Xplorer	00-02	WMPO-3
P400 Xplorer 4x4	96-02	WMPO-3
P425 Xpedition 4x4	00-03	WMPO-3
P425 Magnum 2x4/4x4/6x6	93-98	WMPO-6 (Not compatible with 3.0CI winch)
P500 Scrambler	99-03	WMPO-7 (Not compatible with 3.0CI winch)
P500 Magnum 4x4	99-02	WMPO-3
P500 RMK 2x4	2002	WMPO-3
P500 Sportsman 4x4	96-03	WMPO-3
P600 Sportsman Twin 4x4	2003	WMPO-8
Sportsman 6x6	99-03	WMPO-3
Diesel 4x4	98-02	WMPO-3
P700 Sportsman Twin 4x4	02-03	WMPO-8
PTV 4x4/6x6	02-03	WMPO-3

Assists in double lined and angle pulls.
Rated to 7000 lbs. (3175 kgs) capacity and under.

All Warn winch mounting systems are engineered to fit the winch under the hood out of harms way, and distribute the loads throughout the ATVs frame. This minimizes the possibility of changing the alignment of your ATV.

Bombardier	Year	MFG #
Quest 650 XT 4x4	01-04	60004**
Quest 650 XL 4x4	02	60004**
Quest 650 4x4	01-04	60004**
Traxter Max XT 4x4	03-04	60004**
Traxter Max 4x4	03-04	60004**
Traxter XT 4x4	00-04	60004**
Traxter XL 4x4	01-04	60004**
Traxter 2x4, 4x4	00-04	60004**
Traxter 4x4	99	60004**
Quest 500 XT 4x4	03-04	60004**
Quest 500 XL 4x4	02	60004**
Quest 500 4x4	01-04	60004**
**Not compatible with 3.0ci winch.

All Warn winch mounting systems are engineered to fit the winch under the hood out of harms way, and distribute the loads throughout the ATVs frame. This minimizes the possibility of changing the alignment of your ATV.

Honda	Year	MFG #
TRX650FA Rincon 4x4	03-04	65160
TRX500FA Foreman Rubicon 4x4	00-04	65160
TRX450S Foreman S 4x4	98-01	60174
TRX450FM Foreman S 4x4	02-04	60174
TRX450FE Foreman ES 4x4	02-04	60174
TRX450ES Foreman ES 4x4	98-01	60174
TRX400FW Foreman 4x4	95-03	60174
TRX350TE Rancher ES 2x4	00-03	60794
TRX350FE Rancher ES 4x4	00-03	60794
TRX350TM Rancher 2x4	00-03	60794
TRX350FM Rancher 4x4	00-03	60794
TRX300TW 2x4	93-00	28724*
TRX300FW 4x4	90-92	28878
TRX300FW 4x4	93-00	28724*
TRX250TE Recon ES 2x4	03-04	37209
TRX250 Recon 2x4	97-04	37209
*Not compatible with 3.0ci winch

Don't let a great day of riding or work with ATV end at dusk.
Warn's Trail Lights combine durable, high-impact construction.
Created especially for ATVs, WARN ATV Trail Lights have a lens design that achieves a 110-degree beam spread from side to side and 70-degree vertical beam spread. The result is a field of illumination wider and higher than factory-installed ATV lights so you can get the whole view while you're on the move.
The ATV Trail Lights feature a 35-watt battery saving H3 Halogen bulbs with 400 candlepower, a stamped steel, powder-coated body and glass lens that withstands heat and thermal shock.
The lights use a completely adjustable universal light mounting bracket that allows for easy installation, and come with a wiring harness.
Designed for ATV use, these lights come with a water-resistant switch and all the necessary mounting hardware.
Trail Lights are sold as a pair.

Save $1.41 when you order today!

All Warn winch mounting systems are engineered to fit the winch under the hood out of harms way, and distribute the loads throughout the ATVs frame. This minimizes the possibility of changing the alignment of your ATV.

Polaris	Year	MFG #
Sportsman 6x6	99-03	34901
Ranger 6x6	98-01	38914#
PTV 6x6	02-03	34901
PTV 4x4	02-03	34901
Diesel 4x4	98-02	34901
Sportsman 700 Twin 4x4	02-03	63799
Sportsman 600 Twin 4x4	03	63799
ATP 500 H.O. 4x4	04	34901
Xplorer 500 4x4	97	34901
Sportsman 500 H.O. 4x4	01-03	34901
Sportsman 500 4x4	96-00	34901
Scrambler 500 2x4, 4x4 (rear mount)	99-03	60891*
Magnum 500 RMK 2x4	02	34901
Magnum 500 4x4	99-02	34901
Xpedition 425 4x4	00-03	34901
Magnum 425 2x4, 4x4, 6x6	93-98	35309*
Xpress 400 4x4	97	34901
Xplorer 400 4x4	96-02	34901
Xplorer 400 2x4	00-02	34901
Sportsman 400 4x4	01-03	34901
Sportsman 400 4x4	94-97	35309*
Scrambler 400 2x4, 4x4 (rear mount)	99-03	60891*
Big Boss 400L 6x6	93-99	35309*
Sportsman 335 4x4	98-00	34901
ATP 330 4x4	04	34901
Magnum 330 4x4	03	34901
Magnum 330 2x4	03	39457*
Xpedition 325 4x4	01-02	34901
Trail Boss 325 2x4	00-01	60426*
Magnum 325 4x4	00-02	34901
Magnum 325 2x4	00-02	39457*
Xpress 300 2x4	97-99	37809#
Xpress 300 2x4	93-96	32625#
Xplorer 300 4x4	96-99	34901
Xplorer 250 4x4	00-02	60426*
Trail Boss 250 2x4	93-99	32625#
*Not compatible with 3.0ci winch. #May not fit 3.0ci winch. Mount modification may be required.

Save $1.41 when you order today!

All Warn winch mounting systems are engineered to fit the winch under the hood out of harms way, and distribute the loads throughout the ATVs frame. This minimizes the possibility of changing the alignment of your ATV.

Suzuki	Year	MFG #
LT-F00F Vinson 4x4	03	63811
LT-A500F Vinson 4x4	02-03	63811
LT-F500F QuadRunner 4x4	98-03	37812
LT-A500F QuadRunner 4x4	99-01	37812
LT-F400F Eiger 2x4	02-03	63796
LT-F400 Eiger 2x4	02-03	63796
LT-A400F Eiger 4x4 Auto	02-03	63796
LT-A400 Eiger 2x4	02-03	63796
LT-F300F King Quad 4x4	02-03	61472#
LT-F300F King Quad 4x4	99-01	39425#
LT-F300F King Quad 4x4	93-98	30476#
LT-F250F QuadRunner 4x4	02-03	61472#
LT-F250F QuadRunner 4x4	99-01	39458#
LT-F250F QuadRunner 4x4	92-98	30476#
LT-F250 QuadRunner 2x4	99-02	39458#
LT-F250 QuadRunner 2x4	92-98	30476#
#May not fit 3.0ci winch. Mount modification may be required.

Warn builds durable, long lasting mounting systems for nearly every ATV on the trail. To optimize the performance of your Warn winch, each system is custom designed to fit a specific ATV model. Not 1 style fits all. The mounts are laser-cut for durability. Plus, you get all the necessary hardware for easy installation.

Application Chart
Model	Year	Part #
TRX250 Recon 2x4	97-03	WMHO-1
TRX300 2x4/4x4	93-00	WMHO-2 (Not Compatible with 3.0CI Winch
TRX350 Rancher S/ES 2x4/4x4	00-03	WMHO-3
TRX400 Foreman	95-03	WMHO-4
TRX450S/ES 4x4	98-03	WMHO-4
TRX500 Rubicon	00-03	WMHO-5
TRX650 Rincon	2003	WMHO-5

Warn builds durable, long lasting mounting systems for nearly every ATV on the trail. To optimize the performance of your Warn winch, each system is custom designed to fit a specific ATV model. Not 1 style fits all. The mounts are laser-cut for durability. Plus, you get all the necessary hardware for easy installation.

Application Chart
Model	Year	Part #
KLF300 Bayou 4x4	89-02	WMKA-1 (May not fit 3.0CI winch. Mount modification may be required.)
KVF300 Prairie 2x4/4x4	99-03	WMKA-2
KVF360 Prairie 2x4/4x4	02-03	WMKA-3
KVF400 Prairie 4x4	99-03	WMKA-4
KVF650 Prairie Twin	01-03	WMKA-5

Warn builds durable, long lasting mounting systems for nearly every ATV on the trail. To optimize the performance of your Warn winch, each system is custom designed to fit a specific ATV model. Not 1 style fits all. The mounts are laser-cut for durability. Plus, you get all the necessary hardware for easy installation.

Application Chart
Model	Year	Part #
LTF250 Quadrunner 2x4/4x4	92-98	WMSU-1
LTF250 Quadrunner 2x4	99-02	WMSU-2
LTF250 Quadrunner 4x4	02-03	WMSU-3
LTF250 Quadrunner 4x4	99-01	WMSU-2
LTF300 King Quad 4x4	93-98	WMSU-1 (May not fit 3.0CI winch. Mount modification may be required.)
LTF300 King Quad 4x4	02-03	WMSU-3
LTA400 Eiger 2x4/4x4	02-03	WMSU-4
Vinson 500	02-03	WMSU-5
LTA Quadmaster 4x4	99-01	WMSU-6
LTF500 Quadrunner 4x4	98-03	WMSU-6

Save $1.48 when you order today!

All Warn winch mounting systems are engineered to fit the winch under the hood out of harms way, and distribute the loads throughout the ATVs frame. This minimizes the possibility of changing the alignment of your ATV.

Arctic Cat	Year	MFG #
500i Automatic 4x4	02	62840
500i 4x4	02	62840
500 Automatic TBX 4x4	02-04	62840
500 Automatic TRV 4x4	04	62840
500 Automatic MRP 4x4	03	62840
500 Automatic 4x4	02-04	62840
500 Automatic 4x4	00-01	35048
500 4x4	02-04	62840
500 4x4	98-01	35048
Bear Cat 454 4x4	96-98	35048
400i 2x4, 4x4	02	62840
400 Automatic TBX 4x4	04	62840
400 Automatic MRP 4x4	03	62840
400 Automatic ACT 4x4	03-04	62840
400 Automatic 2x4, 4x4	03-04	62840
400 2x4, 4x4	03-04	62840
400 4x4	02	62840
400 2x4, 4x4	98-01	69027
375 Automatic 2x4, 4x4	02	62840
300 2x4, 4x4	02-04	62840
300 2x4, 4x4	98-01	60927
250 2x4, 4x4	02-04	62840
250 4x4	01	60927
250 4x4	99-01	60927

All Warn winch mounting systems are engineered to fit the winch under the hood out of harms way, and distribute the loads throughout the ATVs frame. This minimizes the possibility of changing the alignment of your ATV.

Kawasaki	Year	MFG #
Mule 3000 2x4	02-03	Not Required
Mule 3010 4x4	02-03	Not Required
Mule 2500 4x4	00-02	60974
Prairie 700 Twin 4x4	04	62038
Prairie 650 Twin 4x4	01-03	62038
Prairie 400 4x4	99-02	39555
Prairie 360 2x4, 4x4	02-04	63801
Prairie 300 2x4, 4x4	99-02	39308
Bayou 400 4x4	93-99	29201#
Bayou 300 4x4	89-02	28880#
Bayou 220 2x4	89-02	21640#
# May not fit 3.0ci winch. Mount modification may be required.

Need more power and features out of your Warn 2000 lb. winch? aUpgrade it!
Allows the A2000 winch to be upgraded to a 2.5ci winch.
Increases pulling capacity from 2,000 to 2,500 lbs.
Comes with the contactor, Express Install wiring, and Mini-Rocker switch control.
Remote Control sold separately; kit includes remote, socket and Express Install wiring.

Save $1.45 when you order today!

10' (3m) chain allows stable, sharp object to be used as a stable winch anchor.

Save $1.71 when you order today!

Retrofit Brake Kits for 2.5ci

Save $2.35 when you order today!

Rated Line Pull: 2500 lbs. (1134 kgs.) single-line.
Motor: 12V DC, .9hp (.7kW) permanent magnet.
Control: Handlebar mounted Mini-rocker switch.
Geartrain: 3-Stage Planetary.
Gear Ratio: 136:1.
Lubrication: Aeroshell #17.
Clutch (freespooling): Cam activated.
Brake: Dynamic. Mechanical brake is available as an option.
Drum Diameter/Length: 2.0"/2.9".
Weight: 15.4 lbs. (7.0 kgs.).
Wire Rope: 50', 3/16" diameter (15m, 5mm diam.).
Fairlead: Roller.
Recommended Battery: 12 Amp/hour minimum for winching.
Battery Leads: 6 gauge.
Finish: Grey.
Warranty: 1-year limited.
The Warn Multi-Mount allows the Warn 2.5ci winch to be easily disconnected and positioned from front to back of the ATV or moved from one ATV to another.
The Multi-Mount platform carrier fits into its special receiver with a hitch pin; simply unplug the Quick Connect power leads, pull the hitch pin, and plug the winch into its new location.
All mounting kits bolt onto the ATV frame for increased strength and reliability.
Multi-Mount Kit includes 2.5ci winch, winch carrier, Quick Connect power leads, remote control, roller fairlead and hitch pin (will also need ATV specific Multi-Mount Mounting Kit).
Multi-Mount Upgrade Kit includes winch carrier, Quick Connect power leads, wiring and hitch pin.

Winch from the front or rear of your ATV, or from bike to bike. The WARN Multi-Mount winch carrier fits into any 1+ Class I receiver. To move the winch, simply unplug the Quick Connect power leads, pull the hitch pin, and plug the winch into its new location. How To Order You'll need two items: 1) WARN 2.5ci Multi-Mount Winch Kit Kit includes: ßßßßß- WARN 2.5ci winch with roller fairlead - All-weather remote control with 10' harness and contactor - Carrier for mounting of winch to front or rear 1.25" Class 1 receiver, with hitch pin ß- Quick Connect wiring for front and rear, with dust caps 2) Multi-Mount Mounting Kit ßKit includes: - Front and rear 1.25" Class 1 receivers Multi-Mount Mounting kits are ATV specific For part numbers go to Multi-Mount Mounting Kits Multi-Mount Upgrade Kit If you already own a 2.5ci winch, you can order the winch carrier and wiring kit to convert it to a Multi-Mount Kit. You will also need the Multi-Mount Mounting Kit Upgrade Kit includes: ß- Carrier for mounting of winch to front or rear 1.25" Class 1 receiver, with hitch pin - Quick Connect wiring for front and rear, with dust caps

Application	MFG #
2.5ci Multi-Mount Winch Kit*	64850
Winch Upgrade Kit to 2.5ci Winch**	63990
Multi-Mount Upgrade Kit w/ Plate and Connect	61292
Cargo Platform	62042
Receiver Shackle Bracket	62041
Shackle	28884
*Requires the additional purchase of one of the ATV-specific mounting kits. **Winch Upgrade Kit includes winch carrier, Quick Connect power leads, wiring and hitch pin.

Save $2.85 when you order today!

ATV Multi-Mounting Kit includes both front and rear receivers and all required hardware for mounting.
Receivers can also mount other WARN Integrated Accessories such as shackles and cargo platforms.
These mounting kits are engineered for specific ATV makes/model. All kits tie into the ATV frame for increased strength and reliability. Bolt-