Save $1.00 when you order today!

New shell design
New ventilation design including forehead vent, chin vent and back vent
Removable/washable comfort liner

Full face adult helmet with Thermoplastic shell.
Plush comfort interior.
Multi ratcheting shield.
Adjustable ventilation.
D ring retention system.
High quality paint with new graphics for 2004.
Available in Jumbo sizes.
Meets DOT standards.

Thermoplastic shell.
High quality paint with clear coat finish.
Anti-scratch high quality optical shield.
Multi-stage ratchet system.
Plush brushed nylon comfort interior.
Adjustable scalp and chin vents.
High strength stainless steel rivets.
Available in larger "Jumbo" sizes.
DOT approved.

Save $1.00 when you order today!

Thermoplastic poly alloy shell construction.
Aerodynamic shell design.
Clear coat finish protects helmet paint and graphics and looks great.
Recessed forehead and aerodynamic chin vents provide increased airflow and reduced wind noise.
Outside adjustable side venturi air vents increase exhaust air flow.
Flush-fit quick release side covers with single turn screw.
Optically-correct, compound-curved, scratch-resistant, UV-treated face shield.
Ample ear cavity for speakers.
Square type D-ring with chin strap holder.
DOT certified.

Save $8.04 when you order today!

Injection-Molded Thermoplastic Shell.
Lightweight aerodynamic shell.
Dual-density lightweight styro liner.
Flow-Through Ventilation System.
Adjustable chin bar and forehead vents.
Anti-Fog System.
Adjustable chin vent directs air upwards across the inside of the shield to help reduce fogging.
Comfortable Interior.
Brushed nylon interior liner with sewn-in top pad.
Wrap-around neck roll reduces wind noise.
Nylon Strap-Retention Band.
Neatly secures chin strap.
HJ-02 Face Shield.
Scratch-resistant coating.
Optically-correct 1-piece design.
100% protection from harmful UV rays.
Exceeds VESC-8.
Built-in Communication System Speaker Pockets.

Save $8.04 when you order today!
HJC¦s CS-Air full-face helmet is constructed of injection molded thermoplastic to provide a beatifully finished, lightweight helmet.
Injection-Molded Thermoplastic Shell
Lightweight aerodynamic shell.
Dual-density lightweight styro liner.
Weight: 3.5 lbs/1600 grams (approx.)
DOT-218.
Flow-Through Ventilation System
Adjustable chin bar and forehead.
Anti-Fog System
Adjustable chin vent directs air upwards across the inside of the shield to help reduce fogging.
Comfortable Interior
Brushed-nylon interior liner with sewn-in top pad.
Wrap-around neck roll reduces wind noise.
Nylon Strap-Retention Band
Neatly secures chin strap.
HJ-04 Face Shield
Scratch-resistant coating.
Optically-correct one-piece design.
100% protection from harmful UV rays.
Exceeds VESC-8.

Save $2.00 when you order today!

Quick change shield; no screws, no side covers.
Gmax reduced noise design - specially designed cheek pads, neck curtain, optimal shield sealing and deluxe venting to reduce unwanted noise.
Gmax flow-through intake/exhaust venting.
D.E.V.S.™ Gmax anti-fog system.
Large eye port opening for greater visibility.
DOT approved.
Gmax superior fit for all sizes.
Removable and adjustable cheek pads.
Padded chin strap.
Deluxe ear pockets for better fit and speaker installation.
Inner chin bar designed for easy microphone installation.
Painted shell with high-tech graphics and clear coat finish.

Save $2.00 when you order today!

Quick change shield; no screws, no side covers.
Gmax reduced noise design - specially designed cheek pads, neck curtain, optimal shield sealing and deluxe venting to reduce unwanted noise.
Gmax flow-through intake/exhaust venting.
D.E.V.S.™ Gmax anti-fog system.
Large eye port opening for greater visibility.
DOT approved.
Gmax superior fit for all sizes.
Removable and adjustable cheek pads.
Padded chin strap.
Deluxe ear pockets for better fit and speaker installation.
Inner chin bar designed for easy microphone installation.
Painted shell with high-tech graphics and clear coat finish.

Full face adult helmet with Thermoplastic shell.
Plush comfort removable interior.
Multi ratcheting quick release shield.
Adjustable ventilation.
D ring retention system.
High quality paint with new graphics for 2004.
Meets Snell 2000 and DOT standards.

Save $2.00 when you order today!

Quick change shield; no screws, no side covers.
Gmax reduced noise design - specially designed cheek pads, neck curtain, optimal shield sealing and deluxe venting to reduce unwanted noise.
Gmax flow-through intake/exhaust venting.
D.E.V.S.™ Gmax anti-fog system.
Large eye port opening for greater visibility.
DOT approved.
Gmax superior fit for all sizes.
Removable and adjustable cheek pads.
Padded chin strap.
Deluxe ear pockets for better fit and speaker installation.
Inner chin bar designed for easy microphone installation.
Painted shell with high-tech graphics and clear coat finish.

Save $2.00 when you order today!

Advanced aerodynamic shell design constructed using advanced thermoplastic poly alloy.
Clear coat finish protects helmet paint and graphics, while providing a great looking shine.
Second generation AFX CAF Ventilation system that greatly increases exhaust air flow, and reduces wind noise.
Washable, plush-brushed, hypoallergenic nylon Interior.
Optically-correct, compound-curved, scratch-resistant, UV-treated, flush-fit, side coverless face shield.
Removable cheek pads.
Ample ear cavity for speakers.
Square type D-ring with chin strap holder.
DOT certified.

Save $2.00 when you order today!

Thermoplastic poly alloy shell construction.
Aerodynamic shell design.
Lightweight and youth-sized shell.
Clear coat finish protects helmet paint and graphics and looks great.
Recessed forehead and aerodynamic chin vents for increased airflow and reduced wind noise.
Adjustable side venturi air vents increase exhaust airflow.
Optically-correct, compound-curved, scratch-resistant, UV-treated face shield with integrated internal ratchet system.
Square type D-ring with chin strap holder.
DOT certified.

The "Blade", dynamic graphics from Z1R
Advanced ABS/Polycarbonate alloy shell
Special head shape contours and padding provide comfortable fit
Venting system includes two adjustable forehead vents with molded-in exhaust ports
Adjustable chin vents help prevent fogging and provide optimum airflow for improved comfort
UV-Resistant clear-coat finish helps protect graphics and paint
DOT certified

Save $9.04 when you order today!

Injection-Molded Thermoplastic Shell.
Lightweight aerodynamic shell.
Dual-density lightweight styro liner.
Flow-Through Ventilation System.
Adjustable chin bar and forehead vents.
Anti-Fog System.
Adjustable chin vent directs air upwards across the inside of the shield to help reduce fogging.
Comfortable Interior.
Brushed nylon interior liner with sewn-in top pad.
Wrap-around neck roll reduces wind noise.
Nylon Strap-Retention Band.
Neatly secures chin strap.
HJ-02 Face Shield.
Scratch-resistant coating.
Optically-correct 1-piece design.
100% protection from harmful UV rays.
Exceeds VESC-8.
Built-in Communication System Speaker Pockets.

Save $9.04 when you order today!

Lightweight aerodynamic injection-molded thermoplastic shell.
Dual-density lightweight styro liner.
Adjustable chin bar and forehead vents.
Adjustable chin vent directs air upwards across the inside of the shield to help reduce fogging.
HJ-04 scratch resistant face shield.
DOT-218 certified.

Save $2.00 when you order today!

Advanced aerodynamic shell design constructed using advanced thermoplastic poly alloy.
Clear coat finish protects helmet paint and graphics, while providing a great looking shine.
Flush-fit head and chin vents.
Fully removable and washable, plush-brushed, hypoallergenic nylon liner.
Optically-correct, compound-curved, scratch-resistant, UV-treated, flush-fit, side coverless face shield.
Removable cheek pads.
Ample ear cavity for speakers.
Square type D-ring with chin strap holder.
Snell M2000 and DOT certified.

Save $35.96 when you order today!
New flip up chin bar design
Face shield ratchets up independently of chin bar
Lightweight polycarbonate shell
Ultra comfort interior
High volume ventilation
DOT approved

Save $2.00 when you order today!

High tech, injection molded, polycarbonate shell
Quick release base plate system allows you to easily change shields
Lower air intake, allows air flowing smoothly to the face shield inside surface, reducing fog
Newly designed back vent, for better air flow through the helmet and enhanced interior cooling

Full face adult helmet with composite shell.
Plush comfort interior.
High quality paint.
D ring retention system.
Meets Snell 2000 and DOT standards.

The "Blade", dynamic graphics from Z1R
Advanced ABS/Polycarbonate alloy shell
Special head shape contours and padding provide comfortable fit
Venting system includes two adjustable forehead vents with molded-in exhaust ports
Adjustable chin vents help prevent fogging and provide optimum airflow for improved comfort
UV-Resistant clear-coat finish helps protect graphics and paint
DOT certified

Save $10.04 when you order today!
The CS-12 comes with many features and an affordable price tag. The CS-12 by HJC offers as much style and comfort as you¦ll ever find in a helmet costing so little.
Injection-Molded Thermoplastic Shell.
Lightweight aerodynamic shell with extra large eyeport for greater visibility.
Three shell and four styro liner sizes provide a comfortable fit for youth and adults. Allows for true XXXL sizing.
Dual-density lightweight styro liner.
Weight: 3.3 lbs/1500 grams (approx.).
DOT-218 SNELL M2000.
Flow-Through Ventilation System.
Adjustable chin bar, forehead and front/side vortex vents.
Two lower back venturi exhaust vents.
Built-in neck roll exhaust vent.
Anti-Fog System.
Adjustable front/side vortex vents with intake ports create a low pressure vacuum effect that draws heat and moisture out of the face shield area.
Adjustable chin vent directs air upwards across the inside of the shield to help prevent fogging.
Removable preformed air guard deflects breath away from the shield.
Comfortable Interior.
Nylex interior liner with sewn-in top pad.
Built-in Communication System Speaker Pockets.
Removable chin curtain.
Wrap-around neck roll reduces wind noise.
Nylon Strap-Retention Band.
Neatly secures chin strap.
HJ-05 Face Shield.
Quick and easy tool-less shield removal.
8-position positive-lock ratchet.
Aerodynamic flush-mounted fit.
No side plates for reduced wind noise.
Scratch-resistant coating.
Optically-correct one-piece design.
100% protection from harmful UV rays.
Exceeds VESC-8.

Save $2.00 when you order today!

Quick change shield; no screws, no side covers.
Gmax reduced noise design - specially designed cheek pads, neck curtain, optimal shield sealing and deluxe venting to reduce unwanted noise.
Gmax flow-through intake/exhaust venting.
D.E.V.S.™ Gmax anti-fog system.
Large eye port opening for greater visibility.
Cool Max lining with mesh trim to channel moisture away from skin.
Gmax superior fit for all sizes.
Removable and adjustable cheek pads.
Padded chin strap.
Deluxe ear pockets for better fit and speaker installation.
Inner chin bar designed for easy microphone installation.
Painted shell with high-tech graphics and clear coat finish.
Double lens show shield available.

Save $1.00 when you order today!

Tenntex shell.
High quality paint with clear coat finish.
Multi-stage ratchet system.
Anti-scratch high quality shield.
Adjustable scalp and chin vents.
New Trufit interior.
Removable and washable interior (replacement liners available).
Snell and D.O.T. approved.

Save $10.04 when you order today!
The CS-12 comes with many features and an affordable price tag. The CS-12 by HJC offers as much style and comfort as you¦ll ever find in a helmet costing so little.
Injection-Molded Thermoplastic Shell.
Lightweight aerodynamic shell with extra large eyeport for greater visibility.
Three shell and four styro liner sizes provide a comfortable fit for youth and adults. Allows for true XXXL sizing.
Dual-density lightweight styro liner.
Weight: 3.3 lbs/1500 grams (approx.).
DOT-218 SNELL M2000.
Flow-Through Ventilation System.
Adjustable chin bar, forehead and front/side vortex vents.
Two lower back venturi exhaust vents.
Built-in neck roll exhaust vent.
Anti-Fog System.
Adjustable front/side vortex vents with intake ports create a low pressure vacuum effect that draws heat and moisture out of the face shield area.
Adjustable chin vent directs air upwards across the inside of the shield to help prevent fogging.
Removable preformed air guard deflects breath away from the shield.
Comfortable Interior.
Nylex interior liner with sewn-in top pad.
Built-in Communication System Speaker Pockets.
Removable chin curtain.
Wrap-around neck roll reduces wind noise.
Nylon Strap-Retention Band.
Neatly secures chin strap.
HJ-05 Face Shield.
Quick and easy tool-less shield removal.
8-position positive-lock ratchet.
Aerodynamic flush-mounted fit.
No side plates for reduced wind noise.
Scratch-resistant coating.
Optically-correct one-piece design.
100% protection from harmful UV rays.
Exceeds VESC-8.

Save $3.00 when you order today!

Quick change shield; no screws, no side covers.
Gmax reduced noise design - specially designed cheek pads, neck curtain, optimal shield sealing and deluxe venting to reduce unwanted noise.
Gmax flow-through intake/exhaust venting.
D.E.V.S.™ Gmax anti-fog system.
Large eye port opening for greater visibility.
Cool Max lining with mesh trim to channel moisture away from skin.
Gmax superior fit for all sizes.
Removable and adjustable cheek pads.
Padded chin strap.
Deluxe ear pockets for better fit and speaker installation.
Inner chin bar designed for easy microphone installation.
Painted shell with high-tech graphics and clear coat finish.
Double lens show shield available.

Save $3.00 when you order today!

Hi impact alloy PC shell.
Easy shield removal system.
2mm scratch resistant molded shield.
Full removable, washable comfort liner.
Duralux anti-allergenic lining material.
Adjustable forehead and chin venting.
Meets or exceeds Snell and DOT standards.

Save $3.00 when you order today!

High tech, injection molded, polycarbonate shell
Quick release base plate system allows you to easily change shields
Lower air intake, allows air flowing smoothly to the face shield inside surface, reducing fog
Newly designed back vent, for better air flow through the helmet and enhanced interior cooling

Save $11.04 when you order today!
The CS-12 comes with many features and an affordable price tag. The CS-12 by HJC offers as much style and comfort as you¦ll ever find in a helmet costing so little.
Injection-Molded Thermoplastic Shell.
Lightweight aerodynamic shell with extra large eyeport for greater visibility.
Three shell and four styro liner sizes provide a comfortable fit for youth and adults. Allows for true XXXL sizing.
Dual-density lightweight styro liner.
Weight: 3.3 lbs/1500 grams (approx.).
DOT-218 SNELL M2000.
Flow-Through Ventilation System.
Adjustable chin bar, forehead and front/side vortex vents.
Two lower back venturi exhaust vents.
Built-in neck roll exhaust vent.
Anti-Fog System.
Adjustable front/side vortex vents with intake ports create a low pressure vacuum effect that draws heat and moisture out of the face shield area.
Adjustable chin vent directs air upwards across the inside of the shield to help prevent fogging.
Removable preformed air guard deflects breath away from the shield.
Comfortable Interior.
Nylex interior liner with sewn-in top pad.
Built-in Communication System Speaker Pockets.
Removable chin curtain.
Wrap-around neck roll reduces wind noise.
Nylon Strap-Retention Band.
Neatly secures chin strap.
HJ-05 Face Shield.
Quick and easy tool-less shield removal.
8-position positive-lock ratchet.
Aerodynamic flush-mounted fit.
No side plates for reduced wind noise.
Scratch-resistant coating.
Optically-correct one-piece design.
100% protection from harmful UV rays.
Exceeds VESC-8.

Save $11.04 when you order today!

The CS-12 takes over where the CL-12 ended with more features and still an affordable price tag.
The CS-12 by HJC offers as much style and comfort as you may ever find in a helmet costing so little.
Injection molded thermoplastic shell is lightweight and aerodynamic with extra large eye-port for greater visibility.
Flow-through ventilation system uses adjustable chin bar, forehead and front side vortex vents along with two lower back and neck roll exhaust vents.
Anti-fog system incorporates adjustable front side vortex vents that draws heat and moisture out of the face shield area.
Removable pre-formed air guard directs breath away from the shield.
Shield also features 8-position positive lock ratchet and tool-less shield removal.
Comfortable interior features Nylex interior liner with sewn-in top pad and wrap-around neck roll.
Quick and easy tool-less shield removal.
100% protection from harmful UV rays.
Built-in communication system speaker pockets.
DOT-218 and Snell-M2000 certified.
Size 3XL DOT approved only.

Save $10.00 when you order today!

Plush Nylex interior.
Value priced thermo composite shell.
Forehead intake vent with venturi exhaust venting.
Positive functioning chin venting.
Double D ring fastening.
Meets or exceeds SNELL 2000 and DOT standards.

Full face adult helmet with composite shell.
Plush comfort interior.
High quality paint.
D ring retention system.
Meets Snell 2000 and DOT standards.

Modular adult helmet with thermoplastic shell.
Push button chin bar release.
Plush comfort interior.
Multi ratcheting, anti scratch shield.
Adjustable ventilation.
D ring retention system.
High quality paint.
Meets DOT standards.

Save $3.00 when you order today!

Extremely affordable, high-quality street helmet.
Clear-coated HIR-TH resin shell.
Dynamic ventilation system with adjustable air flow vents.
Soft, comfortable anti-sweat interior.
Clear, 100% UV-resistant shield featuring quick-release removal system.
Double D-ring strap-retention system.
Comes with a clear shield.
Snell M2000 and DOT certified.

Save $2.00 when you order today!

Advanced aerodynamic shell design constructed using advanced thermoplastic poly alloy.
Recessed forehead and aerodynamic chin vents provide increased airflow and reduced wind noise.
Clear coat finish protects helmet paint and graphics, while providing a great looking shine.
Fully removable and washable, plush-brushed, hypoallergenic nylon liner.
Flush-fit side coverless shield.
Optically-correct, compound-curved, scratch-resistant, UV-treated face shield.
Ample ear cavity for speakers.
Square type D-ring with chin strap holder.
DOT Certified.

Save $3.00 when you order today!

Extremely affordable, high-quality street helmet.
Clear-coated HIR-TH resin shell.
Dynamic ventilation system with adjustable air flow vents.
Soft, comfortable anti-sweat interior.
Clear, 100% UV-resistant shield featuring quick-release removal system.
Double D-ring strap-retention system.
Comes with a clear shield.
Snell M2000 and DOT certified.

Save $3.00 when you order today!

Quick change shield; no screws; no side covers
Gmax reduced noise design -specially designed cheek pads, optimal shield sealing and deluxe venting to reduce unwanted noise.
Gmax flow through intake/exhaust venting
D.E.V.S Gmax anti fog system
Large eyeport opening for greater visibility
Cool Max lining with mesh trim to channel moisture away from skin
Gmax superior fit for all sizes
Removable and adjustable cheek pads
Padded chin strap
Deluxe ear pockets for better fit and speaker installation
Inner chin bar designed for easy mircrophone installation
Painted shell with high-tech graphics and clear coat finish
Double lens snow shield available

Polycarbonate shell
Ventilation system with closable ports
Chin vents help prevent fogging
Comfortable, multi-density padding and Styrene lining
No-Tool, quick-release shield system
Scratch-resistant shield
Removable breath deflector
Snell M2000 and DOT certified

Save $14.04 when you order today!
HJC¦s CL-14 Full-Face Helmet offers protection, comfort and innovative features at an exceptional value.
Injection-Molded Thermoplastic Shell
Wind tunnel tested areodynamic shell shape with an extra large eye port for greater visibility.
Lightweight, Dual Density EPS (expanded poly styrene) liner.
Four shell sizes provide a comfortable fit for youth and adult riders.
Eyeglass friendly design.
Weight: 3.3 lbs/1500 grams (approx.)
DOT-218, SNELL M2000.
Flow-Through Ventilation System
Adjustable chin bar, forehead and front/side vortex vents.
Two rear venturi exhaust vents.
Anti-Fog System
Adjustable front/side vortex vents with intake ports create a low pressure vacuum effect that draws heat and moisture out of the face shield area.
Adjustable chin vent directs air upwards across the inside of the shield to help prevent fogging.
Comfortable Interior
Nylex® interior liner with sewn-in top pad.
Built-in Communication System Speaker Pockets.
Removable, washable cheek pads.
Wrap-around neck roll reduces wind noise.
Optional breath guard and chin curtain.
Nylon Strap-Retention Band
Neatly secures chin strap.
Two-Stage Compression Shield Closure System
A two-stage pivot mechanism compresses the shield into the helmet to provide a securely tight seal.
HJ-07 Face Shield
Quick and easy tool-less shield removal..
Compression shield closure system.
Aerodynamic flush-mounted fit.
Scratch-resistant coating.
Optically-correct one-piece design.
100% protection from harmful UV rays.
Exceeds VESC-8.

Save $14.04 when you order today!
HJC¦s CL-14 Full-Face Helmet offers protection, comfort and innovative features at an exceptional value.
Injection-Molded Thermoplastic Shell
Wind tunnel tested areodynamic shell shape with an extra large eye port for greater visibility.
Lightweight, Dual Density EPS (expanded poly styrene) liner.
Four shell sizes provide a comfortable fit for youth and adult riders.
Eyeglass friendly design.
Weight: 3.3 lbs/1500 grams (approx.)
DOT-218, SNELL M2000.
Flow-Through Ventilation System
Adjustable chin bar, forehead and front/side vortex vents.
Two rear venturi exhaust vents.
Anti-Fog System
Adjustable front/side vortex vents with intake ports create a low pressure vacuum effect that draws heat and moisture out of the face shield area.
Adjustable chin vent directs air upwards across the inside of the shield to help prevent fogging.
Comfortable Interior
Nylex® interior liner with sewn-in top pad.
Built-in Communication System Speaker Pockets.
Removable, washable cheek pads.
Wrap-around neck roll reduces wind noise.
Optional breath guard and chin curtain.
Nylon Strap-Retention Band
Neatly secures chin strap.
Two-Stage Compression Shield Closure System
A two-stage pivot mechanism compresses the shield into the helmet to provide a securely tight seal.
HJ-07 Face Shield
Quick and easy tool-less shield removal..
Compression shield closure system.
Aerodynamic flush-mounted fit.
Scratch-resistant coating.
Optically-correct one-piece design.
100% protection from harmful UV rays.
Exceeds VESC-8.

Save $15.04 when you order today!
HJC¦s CL-14 Full-Face Helmet offers protection, comfort and innovative features at an exceptional value.
Injection-Molded Thermoplastic Shell
Wind tunnel tested areodynamic shell shape with an extra large eye port for greater visibility.
Lightweight, Dual Density EPS (expanded poly styrene) liner.
Four shell sizes provide a comfortable fit for youth and adult riders.
Eyeglass friendly design.
Weight: 3.3 lbs/1500 grams (approx.)
DOT-218, SNELL M2000.
Flow-Through Ventilation System
Adjustable chin bar, forehead and front/side vortex vents.
Two rear venturi exhaust vents.
Anti-Fog System
Adjustable front/side vortex vents with intake ports create a low pressure vacuum effect that draws heat and moisture out of the face shield area.
Adjustable chin vent directs air upwards across the inside of the shield to help prevent fogging.
Comfortable Interior
Nylex® interior liner with sewn-in top pad.
Built-in Communication System Speaker Pockets.
Removable, washable cheek pads.
Wrap-around neck roll reduces wind noise.
Optional breath guard and chin curtain.
Nylon Strap-Retention Band
Neatly secures chin strap.
Two-Stage Compression Shield Closure System
A two-stage pivot mechanism compresses the shield into the helmet to provide a securely tight seal.
HJ-07 Face Shield
Quick and easy tool-less shield removal..
Compression shield closure system.
Aerodynamic flush-mounted fit.
Scratch-resistant coating.
Optically-correct one-piece design.
100% protection from harmful UV rays.
Exceeds VESC-8.

Save $15.04 when you order today!
HJC¦s CL-14 Full-Face Helmet offers protection, comfort and innovative features at an exceptional value.
Injection-Molded Thermoplastic Shell
Wind tunnel tested areodynamic shell shape with an extra large eye port for greater visibility.
Lightweight, Dual Density EPS (expanded poly styrene) liner.
Four shell sizes provide a comfortable fit for youth and adult riders.
Eyeglass friendly design.
Weight: 3.3 lbs/1500 grams (approx.)
DOT-218, SNELL M2000.
Flow-Through Ventilation System
Adjustable chin bar, forehead and front/side vortex vents.
Two rear venturi exhaust vents.
Anti-Fog System
Adjustable front/side vortex vents with intake ports create a low pressure vacuum effect that draws heat and moisture out of the face shield area.
Adjustable chin vent directs air upwards across the inside of the shield to help prevent fogging.
Comfortable Interior
Nylex® interior liner with sewn-in top pad.
Built-in Communication System Speaker Pockets.
Removable, washable cheek pads.
Wrap-around neck roll reduces wind noise.
Optional breath guard and chin curtain.
Nylon Strap-Retention Band
Neatly secures chin strap.
Two-Stage Compression Shield Closure System
A two-stage pivot mechanism compresses the shield into the helmet to provide a securely tight seal.
HJ-07 Face Shield
Quick and easy tool-less shield removal..
Compression shield closure system.
Aerodynamic flush-mounted fit.
Scratch-resistant coating.
Optically-correct one-piece design.
100% protection from harmful UV rays.
Exceeds VESC-8.

Save $15.04 when you order today!

Injection-molded thermoplastic shell.
Wind tunnel tested aerodynamic shell shape with an extra large eye port for greater visibility.
Lightweight, dual density EPS (expanded poly styrene) liner.
Eyeglass friendly design.
Flow-through ventilation system.
Adjustable chin bar, forehead and front/side vortex vents.
Two-rear venturi exhaust vents.
Adjustable front/side vortex vents with intake ports create a low-pressure vacuum effect that draws heat and moisture out of the face shield area.
Adjustable chin vent directs air upwards across the inside of the shield to help prevent fogging.
Nylex interior liner with sewn-in top pad.
Removable, washable cheek pads.
Wrap-around neck roll reduces wind noise.
Nylon strap-retention band neatly secures chinstrap.
Two-stage pivot mechanism, compresses the shield into the helmet to provide an extremely tight seal.
Quick and easy tool-less shield removal.Scratch resistant coating on shield.
Optically-correct one-piece design that has 100% protection from harmful UV rays.
DOT-218 and Snell-M2000 approved.
Size 3XL DOT approved only

Advanced fiberglass composite shell
Extremeley lightweight design
Extra-Large, 144mm eyeport for excellent range of vision
Adjustable forehead vents with dual rear exhaust vents
Adjustable chin vents modulate airflow for maximum comfort
Multi-Density padding and nylon liner
Specially formed ear pockets accept Chatterbox or other speakers
UV-Resistant clear-coat finish helps protect graphics and paint
Snell M2000 and DOT certified

Advanced fiberglass composite shell
Extremeley lightweight design
Extra-Large, 144mm eyeport for excellent range of vision
Adjustable forehead vents with dual rear exhaust vents
Adjustable chin vents modulate airflow for maximum comfort
Multi-Density padding and nylon liner
Specially formed ear pockets accept Chatterbox or other speakers
UV-Resistant clear-coat finish helps protect graphics and paint
Snell M2000 and DOT certified

Save $4.00 when you order today!

Extremely affordable, high-quality street helmet.
Clear-coated HIR-TH resin shell.
Dynamic ventilation system with adjustable air flow vents.
Soft, comfortable anti-sweat interior.
Clear, 100% UV-resistant shield featuring quick-release removal system.
Double D-ring strap-retention system.
Comes with a clear shield.
Snell M2000 and DOT certified.

Save $6.00 when you order today!
Aero stability system.
Chinbar and forehead vents.
Fog resistant insert.
Painted lightweight GE Lexan shell with Hi-brite protective cleat coat.
Double D-ring retention system with velour comfort chinstrap.
Optically correct, tool-less quick change Lexan faceshield with locking mechanism.
Sanitized anti-microbial hypoallergenic interior.
SNELL 2000 and DOT approved.

Save $16.04 when you order today!
HJC¦s CL-14 Full-Face Helmet offers protection, comfort and innovative features at an exceptional value.
Injection-Molded Thermoplastic Shell
Wind tunnel tested areodynamic shell shape with an extra large eye port for greater visibility.
Lightweight, Dual Density EPS (expanded poly styrene) liner.
Four shell sizes provide a comfortable fit for youth and adult riders.
Eyeglass friendly design.
Weight: 3.3 lbs/1500 grams (approx.)
DOT-218, SNELL M2000.
Flow-Through Ventilation System
Adjustable chin bar, forehead and front/side vortex vents.
Two rear venturi exhaust vents.
Anti-Fog System
Adjustable front/side vortex vents with intake ports create a low pressure vacuum effect that draws heat and moisture out of the face shield area.
Adjustable chin vent directs air upwards across the inside of the shield to help prevent fogging.
Comfortable Interior
Nylex® interior liner with sewn-in top pad.
Built-in Communication System Speaker Pockets.
Removable, washable cheek pads.
Wrap-around neck roll reduces wind noise.
Optional breath guard and chin curtain.
Nylon Strap-Retention Band
Neatly secures chin strap.
Two-Stage Compression Shield Closure System
A two-stage pivot mechanism compresses the shield into the helmet to provide a securely tight seal.
HJ-07 Face Shield
Quick and easy tool-less shield removal..
Compression shield closure system.
Aerodynamic flush-mounted fit.
Scratch-resistant coating.
Optically-correct one-piece design.
100% protection from harmful UV rays.
Exceeds VESC-8.

Advanced fiberglass composite shell
Extremely lightweight design
Extra-Large 14mm eyeport for excellent range of vision
Quick-change, ¼-turn shield release for fast, easy sheild changes
Shield features UV silicon coating
Closable forehead vents with dual rear exhaust offer state-of-the-art ventilation
Closable chin venting directs air up the inside of the shield to help prevent fogging
Multi-Density padding and plush nylon liner for maximum comfort
Specially formed ear pockets are comfortable and can accept other speakers
UV-REsistant, cleat-coat finish helps protect graphics and paint
Snell M2000 and DOT certified

Save $4.00 when you order today!

Revolutionary new shell shape in polycarbonate shell
Removable and washable liner
Quick release base plate system, allows you to easily change shields
Chin guard air intake, carries the outside air to the shield inside surface, reducing fog
Upper air intake, for better air flow through the helmet and enhanced interior cooling

Save $17.04 when you order today!

Injection-molded, thermoplastic shell.
Weight: approx. 3.6lbs/1650 grams.
DOT approved.

Save $4.00 when you order today!

Available as RR version with Hi-Flow Racing Ventilation System.
Available as Standard version.
New Ultra-Quick Removal shield mechanism.
New 2.2 mm OPCC, scratch resistant shield.
Hi-impact, Solvent-resistant, Alloy PC shell.
Reduced overall shell dimensions.
New RIB shield sealing technique.
Totally new fitment platform for ultimate wearer comfort.
All new internal comfort lining design for comfort and noise reduction.
All new micro-fiber developed especially to wick away moisture while riding.
Interior is completely removable and quickly replaceable.
New controllable air ventilation and cooling system.
Snell and DOT approved.

Full face adult helmet with composite shell.
Plush comfort removable interior.
Exclusive push button quick release shield.
Flotec ventilation.
High quality paint.
D ring retention system.
Meets Snell 2000 and DOT standards.

Save $5.00 when you order today!

Available as RR version with Hi-Flow Racing Ventilation System.
Available as Standard version.
New Ultra-Quick Removal shield mechanism.
New 2.2 mm OPCC, scratch resistant shield.
Hi-impact, Solvent-resistant, Alloy PC shell.
Reduced overall shell dimensions.
New RIB shield sealing technique.
Totally new fitment platform for ultimate wearer comfort.
All new internal comfort lining design for comfort and noise reduction.
All new micro-fiber developed especially to wick away moisture while riding.
Interior is completely removable and quickly replaceable.
New controllable air ventilation and cooling system.
Snell and DOT approved.

Save $5.00 when you order today!

Featuring Exquick removal system, no tools required.
Flush fitting for reduced wind noise.
Multi position ratchet system.
Exbrite, multi colored decals with high gloss UV protection clear coat, or available as solid colors or metallic finishes.
Injection molded, optically correct, 2mm, polycarbonate complex curve shield.
High density, EPS energy absorbing inner shell.
Double D chin strap retention.
Highly comfortable, soft and very durable, inner comfort lining in a grey color.
Fully removable, washable and replaceable.
Includes Airnet gauze sections to allow ultimate air circulation.
Ergonomically engineered for outstanding comfort and fit.
High specification Sport/Touring helmet.
Designed for general all season and high mileage use.
Switchable, twin top air intakes.
Large, rear exhaust extraction port.
Open and close chin bar venting system with seperate open and close shield demisting port.
Switchable side exhaust Venturis.
Manufactured from advanced ATR injected Alloy Thermo Resin shell material.
Precision Water Jet and finishing technology ensures absolute consistency of shell quality.
Snell 2000 and DOT approved.

The most advanced polycarbonate helmet available today. Icon started with a simple idea, develop a vent system that offers exceptional cooling and one-touch operation without hindering aerodynamics. The result is a styling masterpiece that incorporates an integrated air scoop that lies flush with the shell when closed. They've also included an efficient quick-release shield system, a dual-density styrene liner for incredible comfort, and construction that exceeds all DOT and Snell M2000 standards. *SIZE XXXL IS D.O.T. ONLY

One touch ram-air scoop venting system flows much more air than conventional helmet vent systems.
Rear exhaust port works with ram-air scoop to prevent from overheating.
Internal on/off chin exhaust switch offers control of escaping air.
Side exhaust port works in conjunction with internal chin exhaust to release old air.
Optically correct Polycarbonate, 7-position shield offers safe, clear vision and easy no-tool replacement system.
Chin venting system helps prevent fogging.
Removable breath deflector.

Save $19.04 when you order today!
The AC-11 by HJC utilizes race proven features such as an advanced composite material shell and "ACS" ventilation system to provide one of the most technologically advanced helmets in its class.
Super-Lightweight "ACM" Shell Design
"ACM" (Advanced Composite Material) shell is constructed of a combination of fiberglass and Spectra®.
Two-piece channeled Dual-Density lightweight EPS liner.
Large eyeport opening for greater visibility.
Two shell sizes for a more comfortable fit
Weight: 3.3 lbs/1500 grams (appx).
DOT-218, SNELL M2000
Flow-Thru "ACS" Advanced Channeling Ventilation System
Channeled, four position forehead vents and venturi exhaust vents.
Adjustable chin bar vent helps eliminate shield fogging.
Two-stage, front side intake/vortex vents offer six adjustment levels per side.
Built-in neck-roll exhaust vent
Anti-Fog System
Side intake/vortex vents adjust to create a low-pressure vacuum effect that draws heat and moisture out of the face-shield area.
Adjustable chin vent directs air upwards across the inside of the shield to help prevent fogging.
Includes breath guard
Removable/Washable Interior
Cheek pads and upper liner are easily removed to allow for cleaning.
Built-in communication system speaker pockets.
DuPont® and Cool Max liner, with mesh trim, channels moisture away from the skin.
Wrap-around neck roll reduces wind noise.
Padded chin-strap design
Nylon Strap-Retention Band
Neatly secures chin strap
Two-Stage Compression Shield Closure System
A two-stage pivot mechanism, compresses the shield into the helmet to provide an extremely tight seal
HJ-07 Face Shield
Quick and easy, tool-less shield removal.
Aerodynamic flush-mounted fit.
Scratch-resistant coating.
Optically-correct one-piece design.
100% protection from harmful UV rays.
Exceeds VESC-8.

Save $19.04 when you order today!
The AC-11 by HJC utilizes race proven features such as an advanced composite material shell and "ACS" ventilation system to provide one of the most technologically advanced helmets in its class.
Super-Lightweight "ACM" Shell Design
"ACM" (Advanced Composite Material) shell is constructed of a combination of fiberglass and Spectra®.
Two-piece channeled Dual-Density lightweight EPS liner.
Large eyeport opening for greater visibility.
Two shell sizes for a more comfortable fit
Weight: 3.3 lbs/1500 grams (appx).
DOT-218, SNELL M2000
Flow-Thru "ACS" Advanced Channeling Ventilation System
Channeled, four position forehead vents and venturi exhaust vents.
Adjustable chin bar vent helps eliminate shield fogging.
Two-stage, front side intake/vortex vents offer six adjustment levels per side.
Built-in neck-roll exhaust vent
Anti-Fog System
Side intake/vortex vents adjust to create a low-pressure vacuum effect that draws heat and moisture out of the face-shield area.
Adjustable chin vent directs air upwards across the inside of the shield to help prevent fogging.
Includes breath guard
Removable/Washable Interior
Cheek pads and upper liner are easily removed to allow for cleaning.
Built-in communication system speaker pockets.
DuPont® and Cool Max liner, with mesh trim, channels moisture away from the skin.
Wrap-around neck roll reduces wind noise.
Padded chin-strap design
Nylon Strap-Retention Band
Neatly secures chin strap
Two-Stage Compression Shield Closure System
A two-stage pivot mechanism, compresses the shield into the helmet to provide an extremely tight seal
HJ-07 Face Shield
Quick and easy, tool-less shield removal.
Aerodynamic flush-mounted fit.
Scratch-resistant coating.
Optically-correct one-piece design.
100% protection from harmful UV rays.
Exceeds VESC-8.

Save $20.04 when you order today!
The AC-11 by HJC utilizes race proven features such as an advanced composite material shell and "ACS" ventilation system to provide one of the most technologically advanced helmets in its class.
Super-Lightweight "ACM" Shell Design
"ACM" (Advanced Composite Material) shell is constructed of a combination of fiberglass and Spectra®.
Two-piece channeled Dual-Density lightweight EPS liner.
Large eyeport opening for greater visibility.
Two shell sizes for a more comfortable fit
Weight: 3.3 lbs/1500 grams (appx).
DOT-218, SNELL M2000
Flow-Thru "ACS" Advanced Channeling Ventilation System
Channeled, four position forehead vents and venturi exhaust vents.
Adjustable chin bar vent helps eliminate shield fogging.
Two-stage, front side intake/vortex vents offer six adjustment levels per side.
Built-in neck-roll exhaust vent
Anti-Fog System
Side intake/vortex vents adjust to create a low-pressure vacuum effect that draws heat and moisture out of the face-shield area.
Adjustable chin vent directs air upwards across the inside of the shield to help prevent fogging.
Includes breath guard
Removable/Washable Interior
Cheek pads and upper liner are easily removed to allow for cleaning.
Built-in communication system speaker pockets.
DuPont® and Cool Max liner, with mesh trim, channels moisture away from the skin.
Wrap-around neck roll reduces wind noise.
Padded chin-strap design
Nylon Strap-Retention Band
Neatly secures chin strap
Two-Stage Compression Shield Closure System
A two-stage pivot mechanism, compresses the shield into the helmet to provide an extremely tight seal
HJ-07 Face Shield
Quick and easy, tool-less shield removal.
Aerodynamic flush-mounted fit.
Scratch-resistant coating.
Optically-correct one-piece design.
100% protection from harmful UV rays.
Exceeds VESC-8.

Save $20.04 when you order today!

The AC-11 by HJC utilizes race proven features.
Super lightweight "ACM" (Advanced Composite Material) shell design is constructed of a combination of fiberglass and Spectra.
Two-piece channeled Dual-Density lightweight EPS liner.
Large eye port opening for greater visibility.
Flow-Thru Advanced Channeling Ventilation System.
Channeled, four position forehead vents and venturi exhaust vents.
Adjustable chin bar vent helps eliminate shield fogging.
Anti-fog system with side intake/vortex vents adjust to create a low-pressure vacuum effect that draws heat and moisture out of the face shield area.
Removable/washable cheek pads and upper liner are easily removed to allow for cleaning.
DuPont and Cool Max liner, with mesh trim, channels moisture away from the skin.
Wrap-around neck roll reduces wind noise.
Nylon strap retention band neatly secures chinstrap.
A two stage pivot mechanism, compresses the shield into the helmet to provide an extremely tight seal.
Quick and easy tool-less shield removal.
Built in communication system speaker pockets.
Soft helmet storage bag included.
DOT-218, Snell-M2000.

Save $20.04 when you order today!

The AC-11 by HJC utilizes race proven features.
Super lightweight "ACM" (Advanced Composite Material) shell design is constructed of a combination of fiberglass and Spectra.
Two-piece channeled Dual-Density lightweight EPS liner.
Large eye port opening for greater visibility.
Flow-Thru Advanced Channeling Ventilation System.
Channeled, four position forehead vents and venturi exhaust vents.
Adjustable chin bar vent helps eliminate shield fogging.
Anti-fog system with side intake/vortex vents adjust to create a low-pressure vacuum effect that draws heat and moisture out of the face shield area.
Removable/washable cheek pads and upper liner are easily removed to allow for cleaning.
DuPont and Cool Max liner, with mesh trim, channels moisture away from the skin.
Wrap-around neck roll reduces wind noise.
Nylon strap retention band neatly secures chinstrap.
A two stage pivot mechanism, compresses the shield into the helmet to provide an extremely tight seal.
Quick and easy tool-less shield removal.
Built in communication system speaker pockets.
Soft helmet storage bag included.
DOT-218, Snell-M2000.

Save $5.00 when you order today!

Available as RR version with Hi-Flow Racing Ventilation System.
Available as Standard version.
New Ultra-Quick Removal shield mechanism.
New 2.2 mm OPCC, scratch resistant shield.
Hi-impact, Solvent-resistant, Alloy PC shell.
Reduced overall shell dimensions.
New RIB shield sealing technique.
Totally new fitment platform for ultimate wearer comfort.
All new internal comfort lining design for comfort and noise reduction.
All new micro-fiber developed especially to wick away moisture while riding.
Interior is completely removable and quickly replaceable.
New controllable air ventilation and cooling system.
Snell and DOT approved.

The most advanced polycarbonate helmet available today. Icon started with a simple idea, develop a vent system that offers exceptional cooling and one-touch operation without hindering aerodynamics. The result is a styling masterpiece that incorporates an integrated air scoop that lies flush with the shell when closed. They've also included an efficient quick-release shield system, a dual-density styrene liner for incredible comfort, and construction that exceeds all DOT and Snell M2000 standards. *SIZE XXXL IS D.O.T. ONLY

One touch ram-air scoop venting system flows much more air than conventional helmet vent systems.
Rear exhaust port works with ram-air scoop to prevent from overheating.
Internal on/off chin exhaust switch offers control of escaping air.
Side exhaust port works in conjunction with internal chin exhaust to release old air.
Optically correct Polycarbonate, 7-position shield offers safe, clear vision and easy no-tool replacement system.
Chin venting system helps prevent fogging.
Removable breath deflector.

State-of-the-art polycarbonate helmet designed to meet the demands of today's street rider.
Advanced ventilation system features a one-touch ram-air top vent that allows air to flow in through molded-in venturi channels and out the rear exhaust port.
Top air port lies flush with the helmet when closed for a sleek look.
Addtional ventilation provided by side-exhaust port and positive-lock chin vent.
Handy quick-release shield features a five-postion ratchet adjustment.
Multi-density Nylex liner for comfort and added safety.
New Dammation design was created by underground artist "Scrojo" for a devlish new look.
Rubatone finish is a flat finish design to match your riding gear.
Fusion finish is a revolutionary new texture that showcases Icon's custom graphic helmets and is a combination of clear-coat technology and our Rubatone paint.
D-ring fastener.
DOT and Snell M2000 certified.

State-of-the-art polycarbonate helmet designed to meet the demands of today's street rider.
Advanced ventilation system features a one-touch ram-air top vent that allows air to flow in through molded-in venturi channels and out the rear exhaust port.
Top air port lies flush with the helmet when closed for a sleek look.
Addtional ventilation provided by side-exhaust port and positive-lock chin vent.
Handy quick-release shield features a five-postion ratchet adjustment.
Multi-density Nylex liner for comfort and added safety.
New Dammation design was created by underground artist "Scrojo" for a devlish new look.
Rubatone finish is a flat finish design to match your riding gear.
Fusion finish is a revolutionary new texture that showcases Icon's custom graphic helmets and is a combination of clear-coat technology and our Rubatone paint.
D-ring fastener.
DOT and Snell M2000 certified.

Polycarbonate shell
Ventilation system with closable ports
Chin vents help prevent fogging
Comfortable, multi-density padding and Styrene lining
No-Tool, quick-release shield system
Scratch-resistant shield
Removable breath deflector
Snell M2000 and DOT certified

State-of-the-art polycarbonate helmet designed to meet the demands of today's street rider.
Advanced ventilation system features a one-touch ram-air top vent that allows air to flow in through molded-in venturi channels and out the rear exhaust port.
Top air port lies flush with the helmet when closed for a sleek look.
Addtional ventilation provided by side-exhaust port and positive-lock chin vent.
Handy quick-release shield features a five-postion ratchet adjustment.
Multi-density Nylex liner for comfort and added safety.
New Dammation design was created by underground artist "Scrojo" for a devlish new look.
Rubatone finish is a flat finish design to match your riding gear.
Fusion finish is a revolutionary new texture that showcases Icon's custom graphic helmets and is a combination of clear-coat technology and our Rubatone paint.
D-ring fastener.
DOT and Snell M2000 certified.

The Icon Mainframe helmet was designed with the rider's safety, fit and function in mind. The mainframe helmet features a venturi super-vent system for the ultimate in airflow. A three position dorsal switch acts as an additional ram-air vent to increase the overall cooling of the helmet. The shell is constructed of a (fiberglass/dyneema) blend and is lined with a dual density styrene liner for incredible strength without undue weight. Also incorporated into the design are removable/washable cheek pads, removable anti-fog breath deflector, and the industry's easiest no-tool quick change shield. Exceeds all DOT and Snell M2000 standards.

Super-vent venturi cooling system.
Secondary ram-air forehead vent.
Strategically placed exhaust vent.
Internal on/off chin exhaust switch offers control of escaping air.
Positive-lock chin venting system helps prevent fogging.
Side exhaust port works in conjunction with internal chin exhaust to release old air.
Optically correct Polycarbonate, 7-position shield offers safe, clear vision and easy no-tool replacement system.
Removable breath deflector.
Removable cheek pads with formed ear pockets that can accept communication or audio speakers.

Save $6.00 when you order today!

Tri-Composite, Aramis Epoxy shell.
Bag-molded for shell consistency, strength and lightness.
Reduced shell dimensions.
Aerodynamic shell stability styling.
New KBC Ultra Quick Removal shield mechanism.
New 2.2mm OPCC scratch-resistant shield.
New RIB shield sealing technique.
Totally new fitment platform for ultimate wearer comfort.
Totally new internal comfort lining design for comfort and noise reduction.
Totally new micro-fiber developed especially to wick away moisture while riding.
Interior is totally removable and quickly replaceable for between race preparation.
New controllable air ventilation and cooling.
Meets or exceeds Snell 2000 and DOT standards.

Save $24.04 when you order today!

Lightweight Aerodynamic fiberglass shell design with ABS/Polycarbonate Alloy chin bar.
Flip-Up Chin and Face Shield with single button release and central locking mechanism.
Flow-Through Ventilation System with three-position forehead intake and venturi exhaust super vent.
Anti-Fog System with adjustable vents direct air across the inside of the shield.
Removable/Washable Interior to allow for easy cleaning.
Nylon Strap-Retention Band neatly secures chin strap.
HJ-05 Face Shield is a quick and easy removable tool-less shield.
DOT-218 approved.

Save $6.00 when you order today!

Tri-Composite, Aramis Epoxy shell.
Bag-molded for shell consistency, strength and lightness.
Reduced shell dimensions.
Aerodynamic shell stability styling.
New KBC Ultra Quick Removal shield mechanism.
New 2.2mm OPCC scratch-resistant shield.
New RIB shield sealing technique.
Totally new fitment platform for ultimate wearer comfort.
Totally new internal comfort lining design for comfort and noise reduction.
Totally new micro-fiber developed especially to wick away moisture while riding.
Interior is totally removable and quickly replaceable for between race preparation.
New controllable air ventilation and cooling.
Meets or exceeds Snell 2000 and DOT standards.

high-tech shell uses a sophisticated blend of fiberglass/dyneema for lightweight comfort without sacrificing saftey.
Designed with extra protection features like an EPS chin bar and dual-density liner.
Comfortable padded neck roll.
Superior air flow through ram-air vents combine with super-vent cooling system to pull warm air out of the helmet, keeping you comfortable.
Sheild fogging is a thing of the past with built-in chin venting and a removable breath guard.
Tough polycarbonate sheild can be replaced quickly and easily - without tools.
Rubatone is a flate matte finish designed to match your riding gear.
Halo Fusion, Skull, Scoprion and Kitty helmets feature the revonlutionary Fusion finish that showcases Icon's custom graphic helmets and is a combination of clear-coat technology and Icon's Rubatone paint.
Snell M2000 and DOT certified.

Save $6.00 when you order today!

Modular street helmet for touring or cruising incorporates advanced technology to make them the best in terms of form and function.
Easy-opening chin spoiler can be operated with one hand.
Impact Modified Alloy Composite shell.
Morpho System interior featuring removable, washable hypoallergenic foam pads.
Includes breath deflector and scratch-resistant, double-curvature shield.
Quick-release chin strap buckle with assisted ejection; needs only one finger to operate.
Comes with a clear shield.
DOT certified.

Save $25.04 when you order today!

The AC-11 by HJC utilizes race proven features.
Super lightweight "ACM" (Advanced Composite Material) shell design is constructed of a combination of fiberglass and Spectra.
Two-piece channeled Dual-Density lightweight EPS liner.
Large eye port opening for greater visibility.
Flow-Thru Advanced Channeling Ventilation System.
Channeled, four position forehead vents and venturi exhaust vents.
Adjustable chin bar vent helps eliminate shield fogging.
Anti-fog system with side intake/vortex vents adjust to create a low-pressure vacuum effect that draws heat and moisture out of the face shield area.
Removable/washable cheek pads and upper liner are easily removed to allow for cleaning.
DuPont and Cool Max liner, with mesh trim, channels moisture away from the skin.
Wrap-around neck roll reduces wind noise.
Nylon strap retention band neatly secures chinstrap.
A two stage pivot mechanism, compresses the shield into the helmet to provide an extremely tight seal.
Quick and easy tool-less shield removal.
Built in communication system speaker pockets.
Soft helmet storage bag included.
DOT-218, Snell-M2000.

Save $25.04 when you order today!

Lightweight Aerodynamic fiberglass shell design with ABS/Polycarbonate Alloy chin bar.
Flip-Up Chin and Face Shield with single button release and central locking mechanism.
Flow-Through Ventilation System with three-position forehead intake and venturi exhaust super vent.
Anti-Fog System with adjustable vents direct air across the inside of the shield.
Removable/Washable Interior to allow for easy cleaning.
Nylon Strap-Retention Band neatly secures chin strap.
HJ-05 Face Shield is a quick and easy removable tool-less shield.
DOT-218 approved.

Save $7.00 when you order today!

Most technically advanced, feature-packed helmet from KBC.
Totally 3D engineered from the very beginning by an international design team.
Hi-impact, solvent-resistant shell.
Mag-cam opening mechanism.
Metal-to-metal locking system.
2mm scratch-resistant, molded shield.
Quick removal shield system.
New controllable air ventilation and cooling system.
Unique single button opening system.
New fitment platform.
New internal comfort lining.
Meets or exceeds DOT standards.

The Icon Mainframe helmet was designed with the rider's safety, fit and function in mind. The mainframe helmet features a venturi super-vent system for the ultimate in airflow. A three position dorsal switch acts as an additional ram-air vent to increase the overall cooling of the helmet. The shell is constructed of a (fiberglass/dyneema) blend and is lined with a dual density styrene liner for incredible strength without undue weight. Also incorporated into the design are removable/washable cheek pads, removable anti-fog breath deflector, and the industry's easiest no-tool quick change shield. Exceeds all DOT and Snell M2000 standards.

Super-vent venturi cooling system.
Secondary ram-air forehead vent.
Strategically placed exhaust vent.
Internal on/off chin exhaust switch offers control of escaping air.
Positive-lock chin venting system helps prevent fogging.
Side exhaust port works in conjunction with internal chin exhaust to release old air.
Optically correct Polycarbonate, 7-position shield offers safe, clear vision and easy no-tool replacement system.
Removable breath deflector.
Removable cheek pads with formed ear pockets that can accept communication or audio speakers.

The most advanced polycarbonate helmet available today. Icon started with a simple idea, develop a vent system that offers exceptional cooling and one-touch operation without hindering aerodynamics. The result is a styling masterpiece that incorporates an integrated air scoop that lies flush with the shell when closed. They've also included an efficient quick-release shield system, a dual-density styrene liner for incredible comfort, and construction that exceeds all DOT and Snell M2000 standards. *SIZE XXXL IS D.O.T. ONLY

One touch ram-air scoop venting system flows much more air than conventional helmet vent systems.
Rear exhaust port works with ram-air scoop to prevent from overheating.
Internal on/off chin exhaust switch offers control of escaping air.
Side exhaust port works in conjunction with internal chin exhaust to release old air.
Optically correct Polycarbonate, 7-position shield offers safe, clear vision and easy no-tool replacement system.
Chin venting system helps prevent fogging.
Removable breath deflector.

State-of-the-art polycarbonate helmet designed to meet the demands of today's street rider.
Advanced ventilation system features a one-touch ram-air top vent that allows air to flow in through molded-in venturi channels and out the rear exhaust port.
Top air port lies flush with the helmet when closed for a sleek look.
Addtional ventilation provided by side-exhaust port and positive-lock chin vent.
Handy quick-release shield features a five-postion ratchet adjustment.
Multi-density Nylex liner for comfort and added safety.
New Dammation design was created by underground artist "Scrojo" for a devlish new look.
Rubatone finish is a flat finish design to match your riding gear.
Fusion finish is a revolutionary new texture that showcases Icon's custom graphic helmets and is a combination of clear-coat technology and our Rubatone paint.
D-ring fastener.
DOT and Snell M2000 certified.

Save $4.00 when you order today!
Jet Stream Wing top vent.
Hi-brite protective clear coat on lightweight GE Lexan shell.
Pivoting chinbar.
Multi-position, optically correct, tool-less quick change Lexan shield.
Microlock (adjustable quick release) retention system.
Sanitized anti-microbial hypoallergenic interior.
Fully removable and washable interior on snaps and tabs.
Velour chin strap padding.
Chin curtain, breath deflector, and fog resistant insert included.
DOT approved.

Save $7.00 when you order today!

Most technically advanced, feature-packed helmet from KBC.
Totally 3D engineered from the very beginning by an international design team.
Hi-impact, solvent-resistant shell.
Mag-cam opening mechanism.
Metal-to-metal locking system.
2mm scratch-resistant, molded shield.
Quick removal shield system.
New controllable air ventilation and cooling system.
Unique single button opening system.
New fitment platform.
New internal comfort lining.
Meets or exceeds DOT standards.

Save $7.00 when you order today!

Tri-Composite, Aramis Epoxy shell.
Bag-molded for shell consistency, strength and lightness.
Reduced shell dimensions.
Aerodynamic shell stability styling.
New KBC Ultra Quick Removal shield mechanism.
New 2.2mm OPCC scratch-resistant shield.
New RIB shield sealing technique.
Totally new fitment platform for ultimate wearer comfort.
Totally new internal comfort lining design for comfort and noise reduction.
Totally new micro-fiber developed especially to wick away moisture while riding.
Interior is totally removable and quickly replaceable for between race preparation.
New controllable air ventilation and cooling.
Meets or exceeds Snell 2000 and DOT standards.

Built for the open road, Suomy¦s new street helmet, the Ventura, provides ultimate comfort both for long rides and the wallet as well. Designed as Suomy¦s entry-level helmet, The Ventura is rich in quality and performance. The Ventura is packed with features and materials found typically on much more expensive helmets, such as two shell sizes, an ultra luxurious comfort liner using Dupont® Turinda, known for its comfort, durability and hypo-allergenic qualities, and a beautiful color graphic scheme. In addition, the Ventura comes with a pair of closable Delta diffusers positioned far back on the helmet where aerodynamics forces provide maximum efficiencies.
The complete lists of features found on the Ventura are:
Ultra- Light weight at 1250 grams
2 shell sizes to maximize fit
Sound Absorbing Polymers
High Optics Anti-Scratch, Anti-Fog shield
S.E.C (Structurally Enhanced Composite Fiber Weave)
Hot Cured Bag Molded construction
Over sized sponge cervical neck roll
Breath Deflector
Closable Delta Top Diffusers
Race approval by every major US Motorcycle Race Organization
DOT approved and CERTIFIED to BSI 6658 Type A (What is BSI?): providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls.

Built for the open road, Suomy¦s new street helmet, the Ventura, provides ultimate comfort both for long rides and the wallet as well. Designed as Suomy¦s entry-level helmet, The Ventura is rich in quality and performance. The Ventura is packed with features and materials found typically on much more expensive helmets, such as two shell sizes, an ultra luxurious comfort liner using Dupont® Turinda, known for its comfort, durability and hypo-allergenic qualities, and a beautiful color graphic scheme. In addition, the Ventura comes with a pair of closable Delta diffusers positioned far back on the helmet where aerodynamics forces provide maximum efficiencies.
The complete lists of features found on the Ventura are:
Ultra- Light weight at 1250 grams
2 shell sizes to maximize fit
Sound Absorbing Polymers
High Optics Anti-Scratch, Anti-Fog shield
S.E.C (Structurally Enhanced Composite Fiber Weave)
Hot Cured Bag Molded construction
Over sized sponge cervical neck roll
Breath Deflector
Closable Delta Top Diffusers
Race approval by every major US Motorcycle Race Organization
DOT approved and CERTIFIED to BSI 6658 Type A (What is BSI?): providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls.

Built for the open road, Suomy¦s new street helmet, the Ventura, provides ultimate comfort both for long rides and the wallet as well. Designed as Suomy¦s entry-level helmet, The Ventura is rich in quality and performance. The Ventura is packed with features and materials found typically on much more expensive helmets, such as two shell sizes, an ultra luxurious comfort liner using Dupont® Turinda, known for its comfort, durability and hypo-allergenic qualities, and a beautiful color graphic scheme. In addition, the Ventura comes with a pair of closable Delta diffusers positioned far back on the helmet where aerodynamics forces provide maximum efficiencies.
The complete lists of features found on the Ventura are:
Ultra- Light weight at 1250 grams
2 shell sizes to maximize fit
Sound Absorbing Polymers
High Optics Anti-Scratch, Anti-Fog shield
S.E.C (Structurally Enhanced Composite Fiber Weave)
Hot Cured Bag Molded construction
Over sized sponge cervical neck roll
Breath Deflector
Closable Delta Top Diffusers
Race approval by every major US Motorcycle Race Organization
DOT approved and CERTIFIED to BSI 6658 Type A (What is BSI?): providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls.

Save $13.00 when you order today!
Hi-brite protective clear coat on lightweight GE Lexan shell.
Pivoting chinbar.
Multi-position, optically correct, tool-less quick change Lexan shield.
Microlock (adjustable quick release) retention system.
Sanitized anti-microbial hypoallergenic interior.
Fully removable and washable interior on snaps and tabs.
Velour chin strap padding.
Chin curtain, breath deflector, and fog resistant insert included.
DOT approved.

Save $13.00 when you order today!
Hi-brite protective clear coat on lightweight GE Lexan shell.
Pivoting chinbar.
Multi-position, optically correct, tool-less quick change Lexan shield.
Microlock (adjustable quick release) retention system.
Sanitized anti-microbial hypoallergenic interior.
Fully removable and washable interior on snaps and tabs.
Velour chin strap padding.
Chin curtain, breath deflector, and fog resistant insert included.
DOT approved.

The first helmet that's designed seriously for women.
Color-matched to the Kitty jacket and chaps.
Coated with Fusion finish.

The Icon Mainframe helmet was designed with the rider's safety, fit and function in mind. The mainframe helmet features a venturi super-vent system for the ultimate in airflow. A three position dorsal switch acts as an additional ram-air vent to increase the overall cooling of the helmet. The shell is constructed of a (fiberglass/dyneema) blend and is lined with a dual density styrene liner for incredible strength without undue weight. Also incorporated into the design are removable/washable cheek pads, removable anti-fog breath deflector, and the industry's easiest no-tool quick change shield. Exceeds all DOT and Snell M2000 standards.
Super-vent venturi cooling system.
Secondary ram-air forehead vent.
Strategically placed exhaust vent.
Internal on/off chin exhaust switch offers control of escaping air.
Positive-lock chin venting system helps prevent fogging.
Side exhaust port works in conjunction with internal chin exhaust to release old air.
Optically correct Polycarbonate, 7-position shield offers safe, clear vision and easy no-tool replacement system.
Removable breath deflector.
Removable cheek pads with formed ear pockets that can accept communication or audio speakers.

high-tech shell uses a sophisticated blend of fiberglass/dyneema for lightweight comfort without sacrificing saftey.
Designed with extra protection features like an EPS chin bar and dual-density liner.
Comfortable padded neck roll.
Superior air flow through ram-air vents combine with super-vent cooling system to pull warm air out of the helmet, keeping you comfortable.
Sheild fogging is a thing of the past with built-in chin venting and a removable breath guard.
Tough polycarbonate sheild can be replaced quickly and easily - without tools.
Rubatone is a flate matte finish designed to match your riding gear.
Halo Fusion, Skull, Scoprion and Kitty helmets feature the revonlutionary Fusion finish that showcases Icon's custom graphic helmets and is a combination of clear-coat technology and Icon's Rubatone paint.
Snell M2000 and DOT certified.

Save $7.00 when you order today!

Most technically advanced, feature-packed helmet from KBC.
Totally 3D engineered from the very beginning by an international design team.
Hi-impact, solvent-resistant shell.
Mag-cam opening mechanism.
Metal-to-metal locking system.
2mm scratch-resistant, molded shield.
Quick removal shield system.
New controllable air ventilation and cooling system.
Unique single button opening system.
New fitment platform.
New internal comfort lining.
Meets or exceeds DOT standards.

Save $29.04 when you order today!

Aerodynamic properties are maximized through extensive wind tunnel and rider testing.
Two-layer liner offers unmatched ventilation with internal channels and exhaust ports throughout the helmet.
Integrated Upper Air Intake minimizes air turbulence and maximizes air stream in all riding positions.
The lower air intake provides an additional source of air flow.
The neck outlet vent allows for effective air exhaust.
High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight, rigid and resilient.
The lower air intake provides air flow that helps to diminish shield fogging.
Removable interior cheek pads available in optional sizes for a custom fit.
Chin strap cover can easily be removed to allow for cleaning or replacement.
Standard chin strap clip neatly secures chin strap.
Quick Release Base Plate allows tool-less shield removal.
A wide, 3 dimensionally curved shield offers increased peripheral vision and optical clarity.
Scratch resistant coating.
100% protection from harmful UV A & B rays.
A pre-set lever can easily lock the shield in place to prevent it from opening unexpectedly.

Save $8.00 when you order today!

Tri-Composite, Aramis Epoxy shell.
Bag-molded for shell consistency, strength and lightness.
Reduced shell dimensions.
Aerodynamic shell stability styling.
New KBC Ultra Quick Removal shield mechanism.
New 2.2mm OPCC scratch-resistant shield.
New RIB shield sealing technique.
Totally new fitment platform for ultimate wearer comfort.
Totally new internal comfort lining design for comfort and noise reduction.
Totally new micro-fiber developed especially to wick away moisture while riding.
Interior is totally removable and quickly replaceable for between race preparation.
New controllable air ventilation and cooling.
Meets or exceeds Snell 2000 and DOT standards.

Save $8.00 when you order today!

Tri-Composite, Aramis Epoxy shell.
Bag-molded for shell consistency, strength and lightness.
Reduced shell dimensions.
Aerodynamic shell stability styling.
New KBC Ultra Quick Removal shield mechanism.
New 2.2mm OPCC scratch-resistant shield.
New RIB shield sealing technique.
Totally new fitment platform for ultimate wearer comfort.
Totally new internal comfort lining design for comfort and noise reduction.
Totally new micro-fiber developed especially to wick away moisture while riding.
Interior is totally removable and quickly replaceable for between race preparation.
New controllable air ventilation and cooling.
Meets or exceeds Snell 2000 and DOT standards.

Save $30.04 when you order today!

Aerodynamic properties are maximized through extensive wind tunnel and rider testing.
Two-layer liner offers unmatched ventilation with internal channels and exhaust ports throughout the helmet.
Integrated Upper Air Intake minimizes air turbulence and maximizes air stream in all riding positions.
The lower air intake provides an additional source of air flow.
The neck outlet vent allows for effective air exhaust.
High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight, rigid and resilient.
The lower air intake provides air flow that helps to diminish shield fogging.
Removable interior cheek pads available in optional sizes for a custom fit.
Chin strap cover can easily be removed to allow for cleaning or replacement.
Standard chin strap clip neatly secures chin strap.
Quick Release Base Plate allows tool-less shield removal.
A wide, 3 dimensionally curved shield offers increased peripheral vision and optical clarity.
Scratch resistant coating.
100% protection from harmful UV A & B rays.
A pre-set lever can easily lock the shield in place to prevent it from opening unexpectedly.
DOT-218 and Snell M2000 approved.

high-tech shell uses a sophisticated blend of fiberglass/dyneema for lightweight comfort without sacrificing saftey.
Designed with extra protection features like an EPS chin bar and dual-density liner.
Comfortable padded neck roll.
Superior air flow through ram-air vents combine with super-vent cooling system to pull warm air out of the helmet, keeping you comfortable.
Sheild fogging is a thing of the past with built-in chin venting and a removable breath guard.
Tough polycarbonate sheild can be replaced quickly and easily - without tools.
Rubatone is a flate matte finish designed to match your riding gear.
Halo Fusion, Skull, Scoprion and Kitty helmets feature the revonlutionary Fusion finish that showcases Icon's custom graphic helmets and is a combination of clear-coat technology and Icon's Rubatone paint.
Snell M2000 and DOT certified.

high-tech shell uses a sophisticated blend of fiberglass/dyneema for lightweight comfort without sacrificing saftey.
Designed with extra protection features like an EPS chin bar and dual-density liner.
Comfortable padded neck roll.
Superior air flow through ram-air vents combine with super-vent cooling system to pull warm air out of the helmet, keeping you comfortable.
Sheild fogging is a thing of the past with built-in chin venting and a removable breath guard.
Tough polycarbonate sheild can be replaced quickly and easily - without tools.
Rubatone is a flate matte finish designed to match your riding gear.
Halo Fusion, Skull, Scoprion and Kitty helmets feature the revonlutionary Fusion finish that showcases Icon's custom graphic helmets and is a combination of clear-coat technology and Icon's Rubatone paint.
Snell M2000 and DOT certified.

Save $35.04 when you order today!

RF-1000 Construction (PDF)
Aerodynamic properties are maximized through extensive wind tunnel and rider testing.
The Aero stabilizer dramatically reduces drag and lift coefficients, thus diminishing rider fatigue and increasing performance.
Two layer liner offers unmatched ventilation with internal channels and exhaust ports throughout the helmet.
Integrated upper air intake minimizes air turbulence and maximizes air stream in all riding positions.
Outlet holes in the Aero Stabilizer allow warm air to be exhausted.
The lower air intake provides an additional source of airflow.
The neck outlet vent allows for effective air exhaust.
High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight, rigid and resilient.
The lower air intake provides air flow that helps to diminish shield fogging.
Removable interior cheek pads.
Chin strap cover can easily be removed to allow for cleaning or replacement.
Quick Release Base Plate allows tool-less shield removal.
A wide, 3-dimentionally curved shield offers increased peripheral vision and optical clarity.
Scratch-resistant coating.
100% protection from harmful UV A & B rays.
A pre-set lever can easily lock the shield in place to prevent it form opening unexpectedly.
DOT 218 and Snell M2000 approved.
Weight: 3.24lbs / 1470 grams (approx.)

Save $36.04 when you order today!

RF-1000 Construction (PDF)
Aerodynamic properties are maximized through extensive wind tunnel and rider testing.
The Aero stabilizer dramatically reduces drag and lift coefficients, thus diminishing rider fatigue and increasing performance.
Two layer liner offers unmatched ventilation with internal channels and exhaust ports throughout the helmet.
Integrated upper air intake minimizes air turbulence and maximizes air stream in all riding positions.
Outlet holes in the Aero Stabilizer allow warm air to be exhausted.
The lower air intake provides an additional source of airflow.
The neck outlet vent allows for effective air exhaust.
High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight, rigid and resilient.
The lower air intake provides air flow that helps to diminish shield fogging.
Removable interior cheek pads.
Chin strap cover can easily be removed to allow for cleaning or replacement.
Quick Release Base Plate allows tool-less shield removal.
A wide, 3-dimentionally curved shield offers increased peripheral vision and optical clarity.
Scratch-resistant coating.
100% protection from harmful UV A & B rays.
A pre-set lever can easily lock the shield in place to prevent it form opening unexpectedly.
DOT 218 and Snell M2000 approved.
Weight: 3.24lbs / 1470 grams (approx.)

Save $10.00 when you order today!

V-Flyer helmet features a top-vent system.
SSL construction uses carbon Kevlar fiber stratification and core-system technology for strength and light weight.
Two shell sizes for improved fit.
Aggressively styled helmet designed for racing.
Unique, aerodynamic shell made with unidirectional, advanced composite fibers.
Comfortable, fully removable interior padding.
Clear, 100% UV-resistant, anti-scratch and anti-fog face shield features quick-release removable system.
Adjustable rear vents for true in-helmet airflow.
Double D-ring strap retention system.
Comes with a clear shield.
Snell M2000 and DOT certified.

Save $39.04 when you order today!

Aerodynamic properties are maximized through extensive wind tunnel and rider testing.
Two-layer liner offers unmatched ventilation with internal channels and exhaust ports throughout the helmet.
Integrated Upper Air Intake minimizes air turbulence and maximizes air stream in all riding positions.
The lower air intake provides an additional source of air flow.
The neck outlet vent allows for effective air exhaust.
High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight, rigid and resilient.
The lower air intake provides air flow that helps to diminish shield fogging.
Removable interior cheek pads available in optional sizes for a custom fit.
Chin strap cover can easily be removed to allow for cleaning or replacement.
Standard chin strap clip neatly secures chin strap.
Quick Release Base Plate allows tool-less shield removal.
A wide, 3 dimensionally curved shield offers increased peripheral vision and optical clarity.
Scratch resistant coating.
100% protection from harmful UV A & B rays.
A pre-set lever can easily lock the shield in place to prevent it from opening unexpectedly.
DOT-218 and Snell M2000 approved.

Save $39.04 when you order today!

Aerodynamic properties are maximized through extensive wind tunnel and rider testing.
Two-layer liner offers unmatched ventilation with internal channels and exhaust ports throughout the helmet.
Integrated Upper Air Intake minimizes air turbulence and maximizes air stream in all riding positions.
The lower air intake provides an additional source of air flow.
The neck outlet vent allows for effective air exhaust.
High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight, rigid and resilient.
The lower air intake provides air flow that helps to diminish shield fogging.
Removable interior cheek pads available in optional sizes for a custom fit.
Chin strap cover can easily be removed to allow for cleaning or replacement.
Standard chin strap clip neatly secures chin strap.
Quick Release Base Plate allows tool-less shield removal.
A wide, 3 dimensionally curved shield offers increased peripheral vision and optical clarity.
Scratch resistant coating.
100% protection from harmful UV A & B rays.
A pre-set lever can easily lock the shield in place to prevent it from opening unexpectedly.
DOT-218 and Snell M2000 approved.

Save $42.04 when you order today!

Fiberglass Composite Material (FCM) shell.
Two shell and four styro liner sizes for a more comfortable fit.
Large eyeport opening for greater visibility.
Molded rear tail fin to reduce lift, drag and wind noise.
Recessed adjustable forehead and rear exit vents positioned for optimum ventilation.
Mesh shielded chin vent.
Built in neck roll exhaust vent.
Adjustable anti-fog chin vent.
Breath Chamber System uses negative air pressure to pull heat and moisture (caused by breathing) out through a cavity in the chin bar EPS liner.
Removable perforated air guard deflects breath away from the shield.
Every component was designed to achieve the lightest helmet possible while still incorporating all the features demanded by serious enthusiasts.
Thermo Molded 3D liner system matches liner perfectly to helmet interior for maximum comfort and fit.
Special relief for riders who wear glasses.
The entire interior liner (cheek pads, upper liner and chin strap cover) is easily removed to allow cleaning.
Chin Strap clip neatly secures chin strap.
QRBP (quick Release Base Plate) allows tool-less shield removal and eliminates side coversfor a flush, quiet fit.
3 Dimensionally curved for optical clarity.
Scratch resistant coating
Adjustable Base Plates insure "Air Tight" fit.
100% protection from harmful UV A & B rays.
One piece injection molded for consistent fit.
Optional (CF-1) racing shield with tear-off posts.
Snell 2000 and DOT approved

Save $43.04 when you order today!

Fiberglass Composite Material (FCM) shell.
Two shell and four styro liner sizes for a more comfortable fit.
Large eyeport opening for greater visibility.
Molded rear tail fin to reduce lift, drag and wind noise.
Recessed adjustable forehead and rear exit vents positioned for optimum ventilation.
Mesh shielded chin vent.
Built in neck roll exhaust vent.
Adjustable anti-fog chin vent.
Breath Chamber System uses negative air pressure to pull heat and moisture (caused by breathing) out through a cavity in the chin bar EPS liner.
Removable perforated air guard deflects breath away from the shield.
Every component was designed to achieve the lightest helmet possible while still incorporating all the features demanded by serious enthusiasts.
Thermo Molded 3D liner system matches liner perfectly to helmet interior for maximum comfort and fit.
Special relief for riders who wear glasses.
The entire interior liner (cheek pads, upper liner and chin strap cover) is easily removed to allow cleaning.
Chin Strap clip neatly secures chin strap.
QRBP (quick Release Base Plate) allows tool-less shield removal and eliminates side coversfor a flush, quiet fit.
3 Dimensionally curved for optical clarity.
Scratch resistant coating
Adjustable Base Plates insure "Air Tight" fit.
100% protection from harmful UV A & B rays.
One piece injection molded for consistent fit.
Optional (CF-1) racing shield with tear-off posts.
Snell 2000 and DOT approved

Construction: Extreme Light Weight Bag Molded Kevlar/Fiberglass composite weave.
Weight: 2lbs, 13 oz.
3 Shell sizes to better insure proper fit.
16 Race replicas, 7 solids.
Sure Lock Visor Mechanism.
Unique EPS design to maximize ventilation and impact energy absorption.
Inner liner: removable adjustable and washable DuPont Terinda inner liner, removable and washable cheek pads.
Helmet standard: BSI 6658 Type A and DOT.
Available shields: Clear, Light Smoke, Dark Smoke, Iridium, Iridium Blue, Iridium Gold, Iridium Silver, Race Clear, Race Light Smoke, and Race Dark Smoke.

Save $45.04 when you order today!

RF-1000 Construction (PDF)
Aerodynamic properties are maximized through extensive wind tunnel and rider testing.
The Aero stabilizer dramatically reduces drag and lift coefficients, thus diminishing rider fatigue and increasing performance.
Two layer liner offers unmatched ventilation with internal channels and exhaust ports throughout the helmet.
Integrated upper air intake minimizes air turbulence and maximizes air stream in all riding positions.
Outlet holes in the Aero Stabilizer allow warm air to be exhausted.
The lower air intake provides an additional source of airflow.
The neck outlet vent allows for effective air exhaust.
High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight, rigid and resilient.
The lower air intake provides air flow that helps to diminish shield fogging.
Removable interior cheek pads.
Chin strap cover can easily be removed to allow for cleaning or replacement.
Quick Release Base Plate allows tool-less shield removal.
A wide, 3-dimentionally curved shield offers increased peripheral vision and optical clarity.
Scratch-resistant coating.
100% protection from harmful UV A & B rays.
A pre-set lever can easily lock the shield in place to prevent it form opening unexpectedly.
DOT 218 and Snell M2000 approved.
Weight: 3.24lbs / 1470 grams (approx.)

Save $45.04 when you order today!

RF-1000 Construction (PDF)
Aerodynamic properties are maximized through extensive wind tunnel and rider testing.
The Aero stabilizer dramatically reduces drag and lift coefficients, thus diminishing rider fatigue and increasing performance.
Two layer liner offers unmatched ventilation with internal channels and exhaust ports throughout the helmet.
Integrated upper air intake minimizes air turbulence and maximizes air stream in all riding positions.
Outlet holes in the Aero Stabilizer allow warm air to be exhausted.
The lower air intake provides an additional source of airflow.
The neck outlet vent allows for effective air exhaust.
High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight, rigid and resilient.
The lower air intake provides air flow that helps to diminish shield fogging.
Removable interior cheek pads.
Chin strap cover can easily be removed to allow for cleaning or replacement.
Quick Release Base Plate allows tool-less shield removal.
A wide, 3-dimentionally curved shield offers increased peripheral vision and optical clarity.
Scratch-resistant coating.
100% protection from harmful UV A & B rays.
A pre-set lever can easily lock the shield in place to prevent it form opening unexpectedly.
DOT 218 and Snell M2000 approved.
Weight: 3.24lbs / 1470 grams (approx.)

Save $45.04 when you order today!

RF-1000 Construction (PDF)
Aerodynamic properties are maximized through extensive wind tunnel and rider testing.
The Aero stabilizer dramatically reduces drag and lift coefficients, thus diminishing rider fatigue and increasing performance.
Two layer liner offers unmatched ventilation with internal channels and exhaust ports throughout the helmet.
Integrated upper air intake minimizes air turbulence and maximizes air stream in all riding positions.
Outlet holes in the Aero Stabilizer allow warm air to be exhausted.
The lower air intake provides an additional source of airflow.
The neck outlet vent allows for effective air exhaust.
High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight, rigid and resilient.
The lower air intake provides air flow that helps to diminish shield fogging.
Removable interior cheek pads.
Chin strap cover can easily be removed to allow for cleaning or replacement.
Quick Release Base Plate allows tool-less shield removal.
A wide, 3-dimentionally curved shield offers increased peripheral vision and optical clarity.
Scratch-resistant coating.
100% protection from harmful UV A & B rays.
A pre-set lever can easily lock the shield in place to prevent it form opening unexpectedly.
DOT 218 and Snell M2000 approved.
Weight: 3.24lbs / 1470 grams (approx.)

Save $45.04 when you order today!
(FCM) Designed to minimize wind noise and drag
Single-button release allows chin bar/face shield to be opened with one hand
Central locking mechanism can easily be operated with either hand
Flip up chin bar makes communicating with your helmet on easier and wearing glasses more comfortable
Upper "Multi Air Scoop" ensures maximum air intake and perfect aerodynamics
Lower vent directs airflow upward across the inside of the face shield reducing fogging and turbulance
Interior design reduces wind noise and provides a comfortable fit
Communication system compatable
QRBP (Quick Release Base Plate) allows tool less shield removal and eliminates side covers for a flush, quiet fit
3 Dimensionally curved face shield for optical clarity
Scratch resistant coating
Adjustable Base Plates ensure "Air Tight" fit
100% protection from harmful UV A & B Rays
One piece injection molded for consistent fit
Optional (CF-1) racing shield with tear off posts
DOT approved

Save $41.04 when you order today!

RF-1000 Construction (PDF)
Aerodynamic properties are maximized through extensive wind tunnel and rider testing.
The Aero stabilizer dramatically reduces drag and lift coefficients, thus diminishing rider fatigue and increasing performance.
Two layer liner offers unmatched ventilation with internal channels and exhaust ports throughout the helmet.
Integrated upper air intake minimizes air turbulence and maximizes air stream in all riding positions.
Outlet holes in the Aero Stabilizer allow warm air to be exhausted.
The lower air intake provides an additional source of airflow.
The neck outlet vent allows for effective air exhaust.
High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight, rigid and resilient.
The lower air intake provides air flow that helps to diminish shield fogging.
Removable interior cheek pads.
Chin strap cover can easily be removed to allow for cleaning or replacement.
Quick Release Base Plate allows tool-less shield removal.
A wide, 3-dimentionally curved shield offers increased peripheral vision and optical clarity.
Scratch-resistant coating.
100% protection from harmful UV A & B rays.
A pre-set lever can easily lock the shield in place to prevent it form opening unexpectedly.
DOT 218 and Snell M2000 approved.
Weight: 3.24lbs / 1470 grams (approx.)

Save $46.04 when you order today!
(FCM) Designed to minimize wind noise and drag
Single-button release allows chin bar/face shield to be opened with one hand
Central locking mechanism can easily be operated with either hand
Flip up chin bar makes communicating with your helmet on easier and wearing glasses more comfortable
Upper "Multi Air Scoop" ensures maximum air intake and perfect aerodynamics
Lower vent directs airflow upward across the inside of the face shield reducing fogging and turbulance
Interior design reduces wind noise and provides a comfortable fit
Communication system compatable
QRBP (Quick Release Base Plate) allows tool less shield removal and eliminates side covers for a flush, quiet fit
3 Dimensionally curved face shield for optical clarity
Scratch resistant coating
Adjustable Base Plates ensure "Air Tight" fit
100% protection from harmful UV A & B Rays
One piece injection molded for consistent fit
Optional (CF-1) racing shield with tear off posts
DOT approved

Save $49.04 when you order today!

RF-1000 Construction (PDF)
Aerodynamic properties are maximized through extensive wind tunnel and rider testing.
The Aero stabilizer dramatically reduces drag and lift coefficients, thus diminishing rider fatigue and increasing performance.
Two layer liner offers unmatched ventilation with internal channels and exhaust ports throughout the helmet.
Integrated upper air intake minimizes air turbulence and maximizes air stream in all riding positions.
Outlet holes in the Aero Stabilizer allow warm air to be exhausted.
The lower air intake provides an additional source of airflow.
The neck outlet vent allows for effective air exhaust.
High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight, rigid and resilient.
The lower air intake provides air flow that helps to diminish shield fogging.
Removable interior cheek pads.
Chin strap cover can easily be removed to allow for cleaning or replacement.
Quick Release Base Plate allows tool-less shield removal.
A wide, 3-dimentionally curved shield offers increased peripheral vision and optical clarity.
Scratch-resistant coating.
100% protection from harmful UV A & B rays.
A pre-set lever can easily lock the shield in place to prevent it form opening unexpectedly.
DOT 218 and Snell M2000 approved.
Weight: 3.24lbs / 1470 grams (approx.)

Save $49.04 when you order today!

RF-1000 Construction (PDF)
Aerodynamic properties are maximized through extensive wind tunnel and rider testing.
The Aero stabilizer dramatically reduces drag and lift coefficients, thus diminishing rider fatigue and increasing performance.
Two layer liner offers unmatched ventilation with internal channels and exhaust ports throughout the helmet.
Integrated upper air intake minimizes air turbulence and maximizes air stream in all riding positions.
Outlet holes in the Aero Stabilizer allow warm air to be exhausted.
The lower air intake provides an additional source of airflow.
The neck outlet vent allows for effective air exhaust.
High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight, rigid and resilient.
The lower air intake provides air flow that helps to diminish shield fogging.
Removable interior cheek pads.
Chin strap cover can easily be removed to allow for cleaning or replacement.
Quick Release Base Plate allows tool-less shield removal.
A wide, 3-dimentionally curved shield offers increased peripheral vision and optical clarity.
Scratch-resistant coating.
100% protection from harmful UV A & B rays.
A pre-set lever can easily lock the shield in place to prevent it form opening unexpectedly.
DOT 218 and Snell M2000 approved.
Weight: 3.24lbs / 1470 grams (approx.)

Save $49.04 when you order today!

RF-1000 Construction (PDF)
Aerodynamic properties are maximized through extensive wind tunnel and rider testing.
The Aero stabilizer dramatically reduces drag and lift coefficients, thus diminishing rider fatigue and increasing performance.
Two layer liner offers unmatched ventilation with internal channels and exhaust ports throughout the helmet.
Integrated upper air intake minimizes air turbulence and maximizes air stream in all riding positions.
Outlet holes in the Aero Stabilizer allow warm air to be exhausted.
The lower air intake provides an additional source of airflow.
The neck outlet vent allows for effective air exhaust.
High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight, rigid and resilient.
The lower air intake provides air flow that helps to diminish shield fogging.
Removable interior cheek pads.
Chin strap cover can easily be removed to allow for cleaning or replacement.
Quick Release Base Plate allows tool-less shield removal.
A wide, 3-dimentionally curved shield offers increased peripheral vision and optical clarity.
Scratch-resistant coating.
100% protection from harmful UV A & B rays.
A pre-set lever can easily lock the shield in place to prevent it form opening unexpectedly.
DOT 218 and Snell M2000 approved.
Weight: 3.24lbs / 1470 grams (approx.)

Save $14.00 when you order today!

Two shell sizes for improved fit.
SSL construction uses carbon Kevlar fiber stratification and core-system technology for strength and light weight.
X-Vent Air Dynamic Design gives an improved aerodynamic penetration index to dramatically reduce buffeting and increase stability.
X-Vent ventilation system uses vents and extractors to supply fresh, cooling airflow inside helmet.
Removable, washable CoolMax interior stays comfortable.
Flat, molded, UV-resistant, anti-scratch and anti-fog shield with optional tear-off system available.
Shield needs no tools for removal.
Double D-ring chin strap.
Comes with clear shield.
Snell M2000 and DOT certified.

Save $52.04 when you order today!

Fiberglass Composite Material (FCM) shell.
Two shell and four styro liner sizes for a more comfortable fit.
Large eyeport opening for greater visibility.
Molded rear tail fin to reduce lift, drag and wind noise.
Recessed adjustable forehead and rear exit vents positioned for optimum ventilation.
Mesh shielded chin vent.
Built in neck roll exhaust vent.
Adjustable anti-fog chin vent.
Breath Chamber System uses negative air pressure to pull heat and moisture (caused by breathing) out through a cavity in the chin bar EPS liner.
Removable perforated air guard deflects breath away from the shield.
Every component was designed to achieve the lightest helmet possible while still incorporating all the features demanded by serious enthusiasts.
Thermo Molded 3D liner system matches liner perfectly to helmet interior for maximum comfort and fit.
Special relief for riders who wear glasses.
The entire interior liner (cheek pads, upper liner and chin strap cover) is easily removed to allow cleaning.
Chin Strap clip neatly secures chin strap.
QRBP (quick Release Base Plate) allows tool-less shield removal and eliminates side coversfor a flush, quiet fit.
3 Dimensionally curved for optical clarity.
Scratch resistant coating
Adjustable Base Plates insure "Air Tight" fit.
100% protection from harmful UV A & B rays.
One piece injection molded for consistent fit.
Optional (CF-1) racing shield with tear-off posts.
Snell 2000 and DOT approved

Save $52.04 when you order today!

Fiberglass Composite Material (FCM) shell.
Two shell and four styro liner sizes for a more comfortable fit.
Large eyeport opening for greater visibility.
Molded rear tail fin to reduce lift, drag and wind noise.
Recessed adjustable forehead and rear exit vents positioned for optimum ventilation.
Mesh shielded chin vent.
Built in neck roll exhaust vent.
Adjustable anti-fog chin vent.
Breath Chamber System uses negative air pressure to pull heat and moisture (caused by breathing) out through a cavity in the chin bar EPS liner.
Removable perforated air guard deflects breath away from the shield.
Every component was designed to achieve the lightest helmet possible while still incorporating all the features demanded by serious enthusiasts.
Thermo Molded 3D liner system matches liner perfectly to helmet interior for maximum comfort and fit.
Special relief for riders who wear glasses.
The entire interior liner (cheek pads, upper liner and chin strap cover) is easily removed to allow cleaning.
Chin Strap clip neatly secures chin strap.
QRBP (quick Release Base Plate) allows tool-less shield removal and eliminates side coversfor a flush, quiet fit.
3 Dimensionally curved for optical clarity.
Scratch resistant coating
Adjustable Base Plates insure "Air Tight" fit.
100% protection from harmful UV A & B rays.
One piece injection molded for consistent fit.
Optional (CF-1) racing shield with tear-off posts.
Snell 2000 and DOT approved

Save $15.00 when you order today!

Two shell sizes for improved fit.
SSL construction uses carbon Kevlar fiber stratification and core-system technology for strength and light weight.
X-Vent Air Dynamic Design gives an improved aerodynamic penetration index to dramatically reduce buffeting and increase stability.
X-Vent ventilation system uses vents and extractors to supply fresh, cooling airflow inside helmet.
Removable, washable CoolMax interior stays comfortable.
Flat, molded, UV-resistant, anti-scratch and anti-fog shield with optional tear-off system available.
Shield needs no tools for removal.
Double D-ring chin strap.
Comes with clear shield.
Snell M2000 and DOT certified.

Construction: Extreme Light Weight Bag Molded Kevlar/Fiberglass composite weave.
Weight: 2lbs, 13 oz.
3 Shell sizes to better insure proper fit.
16 Race replicas, 7 solids.
Sure Lock Visor Mechanism.
Unique EPS design to maximize ventilation and impact energy absorption.
Inner liner: removable adjustable and washable DuPont Terinda inner liner, removable and washable cheek pads.
Helmet standard: BSI 6658 Type A and DOT.
Available shields: Clear, Light Smoke, Dark Smoke, Iridium, Iridium Blue, Iridium Gold, Iridium Silver, Race Clear, Race Light Smoke, and Race Dark Smoke.

Construction: Extreme Light Weight Bag Molded Kevlar/Fiberglass composite weave.
Weight: 2lbs, 13 oz.
3 Shell sizes to better insure proper fit.
16 Race replicas, 7 solids.
Sure Lock Visor Mechanism.
Unique EPS design to maximize ventilation and impact energy absorption.
Inner liner: removable adjustable and washable DuPont Terinda inner liner, removable and washable cheek pads.
Helmet standard: BSI 6658 Type A and DOT.
Available shields: Clear, Light Smoke, Dark Smoke, Iridium, Iridium Blue, Iridium Gold, Iridium Silver, Race Clear, Race Light Smoke, and Race Dark Smoke.

Construction: Extreme Light Weight Bag Molded Kevlar/Fiberglass composite weave.
Weight: 2lbs, 13 oz.
3 Shell sizes to better insure proper fit.
16 Race replicas, 7 solids.
Sure Lock Visor Mechanism.
Unique EPS design to maximize ventilation and impact energy absorption.
Inner liner: removable adjustable and washable DuPont Terinda inner liner, removable and washable cheek pads.
Helmet standard: BSI 6658 Type A and DOT.
Available shields: Clear, Light Smoke, Dark Smoke, Iridium, Iridium Blue, Iridium Gold, Iridium Silver, Race Clear, Race Light Smoke, and Race Dark Smoke.

Construction: Extreme Light Weight Bag Molded Kevlar/Fiberglass composite weave.
Weight: 2lbs, 13 oz.
3 Shell sizes to better insure proper fit.
16 Race replicas, 7 solids.
Sure Lock Visor Mechanism.
Unique EPS design to maximize ventilation and impact energy absorption.
Inner liner: removable adjustable and washable DuPont Terinda inner liner, removable and washable cheek pads.
Helmet standard: BSI 6658 Type A and DOT.
Available shields: Clear, Light Smoke, Dark Smoke, Iridium, Iridium Blue, Iridium Gold, Iridium Silver, Race Clear, Race Light Smoke, and Race Dark Smoke.

Construction: Extreme Light Weight Bag Molded Kevlar/Fiberglass composite weave.
Weight: 2lbs, 13 oz.
3 Shell sizes to better insure proper fit.
16 Race replicas, 7 solids.
Sure Lock Visor Mechanism.
Unique EPS design to maximize ventilation and impact energy absorption.
Inner liner: removable adjustable and washable DuPont Terinda inner liner, removable and washable cheek pads.
Helmet standard: BSI 6658 Type A and DOT.
Available shields: Clear, Light Smoke, Dark Smoke, Iridium, Iridium Blue, Iridium Gold, Iridium Silver, Race Clear, Race Light Smoke, and Race Dark Smoke.

Construction: Extreme Light Weight Bag Molded Kevlar/Fiberglass composite weave.
Weight: 2lbs, 13 oz.
3 Shell sizes to better insure proper fit.
16 Race replicas, 7 solids.
Sure Lock Visor Mechanism.
Unique EPS design to maximize ventilation and impact energy absorption.
Inner liner: removable adjustable and washable DuPont Terinda inner liner, removable and washable cheek pads.
Helmet standard: BSI 6658 Type A and DOT.
Available shields: Clear, Light Smoke, Dark Smoke, Iridium, Iridium Blue, Iridium Gold, Iridium Silver, Race Clear, Race Light Smoke, and Race Dark Smoke.

Construction: Extreme Light Weight Bag Molded Kevlar/Fiberglass composite weave.
Weight: 2lbs, 13 oz.
3 Shell sizes to better insure proper fit.
16 Race replicas, 7 solids.
Sure Lock Visor Mechanism.
Unique EPS design to maximize ventilation and impact energy absorption.
Inner liner: removable adjustable and washable DuPont Terinda inner liner, removable and washable cheek pads.
Helmet standard: BSI 6658 Type A and DOT.
Available shields: Clear, Light Smoke, Dark Smoke, Iridium, Iridium Blue, Iridium Gold, Iridium Silver, Race Clear, Race Light Smoke, and Race Dark Smoke.

Construction: Extreme Light Weight Bag Molded Kevlar/Fiberglass composite weave.
Weight: 2lbs, 13 oz.
3 Shell sizes to better insure proper fit.
16 Race replicas, 7 solids.
Sure Lock Visor Mechanism.
Unique EPS design to maximize ventilation and impact energy absorption.
Inner liner: removable adjustable and washable DuPont Terinda inner liner, removable and washable cheek pads.
Helmet standard: BSI 6658 Type A and DOT.
Available shields: Clear, Light Smoke, Dark Smoke, Iridium, Iridium Blue, Iridium Gold, Iridium Silver, Race Clear, Race Light Smoke, and Race Dark Smoke.

Construction: Extreme Light Weight Bag Molded Kevlar/Fiberglass composite weave.
Weight: 2lbs, 13 oz.
3 Shell sizes to better insure proper fit.
16 Race replicas, 7 solids.
Sure Lock Visor Mechanism.
Unique EPS design to maximize ventilation and impact energy absorption.
Inner liner: removable adjustable and washable DuPont Terinda inner liner, removable and washable cheek pads.
Helmet standard: BSI 6658 Type A and DOT.
Available shields: Clear, Light Smoke, Dark Smoke, Iridium, Iridium Blue, Iridium Gold, Iridium Silver, Race Clear, Race Light Smoke, and Race Dark Smoke.

Construction: Extreme Light Weight Bag Molded Kevlar/Fiberglass composite weave.
Weight: 2lbs, 13 oz.
3 Shell sizes to better insure proper fit.
16 Race replicas, 7 solids.
Sure Lock Visor Mechanism.
Unique EPS design to maximize ventilation and impact energy absorption.
Inner liner: removable adjustable and washable DuPont Terinda inner liner, removable and washable cheek pads.
Helmet standard: BSI 6658 Type A and DOT.
Available shields: Clear, Light Smoke, Dark Smoke, Iridium, Iridium Blue, Iridium Gold, Iridium Silver, Race Clear, Race Light Smoke, and Race Dark Smoke.

Construction: Extreme Light Weight Bag Molded Kevlar/Fiberglass composite weave.
Weight: 2lbs, 13 oz.
3 Shell sizes to better insure proper fit.
16 Race replicas, 7 solids.
Sure Lock Visor Mechanism.
Unique EPS design to maximize ventilation and impact energy absorption.
Inner liner: removable adjustable and washable DuPont Terinda inner liner, removable and washable cheek pads.
Helmet standard: BSI 6658 Type A and DOT.
Available shields: Clear, Light Smoke, Dark Smoke, Iridium, Iridium Blue, Iridium Gold, Iridium Silver, Race Clear, Race Light Smoke, and Race Dark Smoke.

Construction: Extreme Light Weight Bag Molded Kevlar/Fiberglass composite weave.
Weight: 2lbs, 13 oz.
3 Shell sizes to better insure proper fit.
16 Race replicas, 7 solids.
Sure Lock Visor Mechanism.
Unique EPS design to maximize ventilation and impact energy absorption.
Inner liner: removable adjustable and washable DuPont Terinda inner liner, removable and washable cheek pads.
Helmet standard: BSI 6658 Type A and DOT.
Available shields: Clear, Light Smoke, Dark Smoke, Iridium, Iridium Blue, Iridium Gold, Iridium Silver, Race Clear, Race Light Smoke, and Race Dark Smoke.

Construction: Extreme Light Weight Bag Molded Kevlar/Fiberglass composite weave.
Weight: 2lbs, 13 oz.
3 Shell sizes to better insure proper fit.
16 Race replicas, 7 solids.
Sure Lock Visor Mechanism.
Unique EPS design to maximize ventilation and impact energy absorption.
Inner liner: removable adjustable and washable DuPont Terinda inner liner, removable and washable cheek pads.
Helmet standard: BSI 6658 Type A and DOT.
Available shields: Clear, Light Smoke, Dark Smoke, Iridium, Iridium Blue, Iridium Gold, Iridium Silver, Race Clear, Race Light Smoke, and Race Dark Smoke.

Construction: Extreme Light Weight Bag Molded Kevlar/Fiberglass composite weave.
Weight: 2lbs, 13 oz.
3 Shell sizes to better insure proper fit.
16 Race replicas, 7 solids.
Sure Lock Visor Mechanism.
Unique EPS design to maximize ventilation and impact energy absorption.
Inner liner: removable adjustable and washable DuPont Terinda inner liner, removable and washable cheek pads.
Helmet standard: BSI 6658 Type A and DOT.
Available shields: Clear, Light Smoke, Dark Smoke, Iridium, Iridium Blue, Iridium Gold, Iridium Silver, Race Clear, Race Light Smoke, and Race Dark Smoke.

Save $56.04 when you order today!

X-Eleven Construction (PDF)
Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders' feedback.
The Aero Edge Spoiler dramatically reduces drag and lift coefficients, thus diminishing rider fatigue and increasing performance.
Offers unmatched ventilation with internal channels and exhaust ports throughout the helmet.
The Dual Air Charge system: A forehead lower intake and a forehead upper "Air Scoop II", combine to maximize flow-through ventilation.
Outlet holes in the Aero Edge Spoiler allow warm air to be exhausted.
The lower air intake provides an additional source of air flow.
The neck outlet vent allows for effective air exhaust.
Exhaled air is absorbed into the "Breath Chamber II" and exhausted by negative air pressure, thus eliminating shield fogging.
The entire interior liner (cheek pads, upper liner and chin strap cover) is easily removed to allow cleaning.
Each component of the inner liner is ergonomically designed to offer safety, fit and comfort.
Chin Strap clip neatly secures chin strap.
QRBP (quick Release Base Plate) allows toolless shield removal.
A wide, 3 Dimensionally curved shield offers increased peripheral vision and optical clarity.
Scratch resistant coating.
100% protection from harmful UV A & B rays.
A pre-set lever can easily lock the shield in place to prevent it from opening unexpectedly.
Snell 2000 and DOT approved.

Save $57.04 when you order today!

X-Eleven Construction (PDF)
Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders' feedback.
The Aero Edge Spoiler dramatically reduces drag and lift coefficients, thus diminishing rider fatigue and increasing performance.
Offers unmatched ventilation with internal channels and exhaust ports throughout the helmet.
The Dual Air Charge system: A forehead lower intake and a forehead upper "Air Scoop II", combine to maximize flow-through ventilation.
Outlet holes in the Aero Edge Spoiler allow warm air to be exhausted.
The lower air intake provides an additional source of air flow.
The neck outlet vent allows for effective air exhaust.
Exhaled air is absorbed into the "Breath Chamber II" and exhausted by negative air pressure, thus eliminating shield fogging.
The entire interior liner (cheek pads, upper liner and chin strap cover) is easily removed to allow cleaning.
Each component of the inner liner is ergonomically designed to offer safety, fit and comfort.
Chin Strap clip neatly secures chin strap.
QRBP (quick Release Base Plate) allows toolless shield removal.
A wide, 3 Dimensionally curved shield offers increased peripheral vision and optical clarity.
Scratch resistant coating.
100% protection from harmful UV A & B rays.
A pre-set lever can easily lock the shield in place to prevent it from opening unexpectedly.
Snell 2000 and DOT approved.

Save $66.04 when you order today!

X-Eleven Construction (PDF)
Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders' feedback.
The Aero Edge Spoiler dramatically reduces drag and lift coefficients, thus diminishing rider fatigue and increasing performance.
Offers unmatched ventilation with internal channels and exhaust ports throughout the helmet.
The Dual Air Charge system: A forehead lower intake and a forehead upper "Air Scoop II", combine to maximize flow-through ventilation.
Outlet holes in the Aero Edge Spoiler allow warm air to be exhausted.
The lower air intake provides an additional source of air flow.
The neck outlet vent allows for effective air exhaust.
Exhaled air is absorbed into the "Breath Chamber II" and exhausted by negative air pressure, thus eliminating shield fogging.
The entire interior liner (cheek pads, upper liner and chin strap cover) is easily removed to allow cleaning.
Each component of the inner liner is ergonomically designed to offer safety, fit and comfort.
Chin Strap clip neatly secures chin strap.
QRBP (quick Release Base Plate) allows toolless shield removal.
A wide, 3 Dimensionally curved shield offers increased peripheral vision and optical clarity.
Scratch resistant coating.
100% protection from harmful UV A & B rays.
A pre-set lever can easily lock the shield in place to prevent it from opening unexpectedly.
Snell 2000 and DOT approved.

Save $66.04 when you order today!

X-Eleven Construction (PDF)
Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders' feedback.
The Aero Edge Spoiler dramatically reduces drag and lift coefficients, thus diminishing rider fatigue and increasing performance.
Offers unmatched ventilation with internal channels and exhaust ports throughout the helmet.
The Dual Air Charge system: A forehead lower intake and a forehead upper "Air Scoop II", combine to maximize flow-through ventilation.
Outlet holes in the Aero Edge Spoiler allow warm air to be exhausted.
The lower air intake provides an additional source of air flow.
The neck outlet vent allows for effective air exhaust.
Exhaled air is absorbed into the "Breath Chamber II" and exhausted by negative air pressure, thus eliminating shield fogging.
The entire interior liner (cheek pads, upper liner and chin strap cover) is easily removed to allow cleaning.
Each component of the inner liner is ergonomically designed to offer safety, fit and comfort.
Chin Strap clip neatly secures chin strap.
QRBP (quick Release Base Plate) allows toolless shield removal.
A wide, 3 Dimensionally curved shield offers increased peripheral vision and optical clarity.
Scratch resistant coating.
100% protection from harmful UV A & B rays.
A pre-set lever can easily lock the shield in place to prevent it from opening unexpectedly.
Snell 2000 and DOT approved.

Save $66.04 when you order today!

X-Eleven Construction (PDF)
Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders' feedback.
The Aero Edge Spoiler dramatically reduces drag and lift coefficients, thus diminishing rider fatigue and increasing performance.
Offers unmatched ventilation with internal channels and exhaust ports throughout the helmet.
The Dual Air Charge system: A forehead lower intake and a forehead upper "Air Scoop II", combine to maximize flow-through ventilation.
Outlet holes in the Aero Edge Spoiler allow warm air to be exhausted.
The lower air intake provides an additional source of air flow.
The neck outlet vent allows for effective air exhaust.
Exhaled air is absorbed into the "Breath Chamber II" and exhausted by negative air pressure, thus eliminating shield fogging.
The entire interior liner (cheek pads, upper liner and chin strap cover) is easily removed to allow cleaning.
Each component of the inner liner is ergonomically designed to offer safety, fit and comfort.
Chin Strap clip neatly secures chin strap.
QRBP (quick Release Base Plate) allows toolless shield removal.
A wide, 3 Dimensionally curved shield offers increased peripheral vision and optical clarity.
Scratch resistant coating.
100% protection from harmful UV A & B rays.
A pre-set lever can easily lock the shield in place to prevent it from opening unexpectedly.
Snell 2000 and DOT approved.

Save $66.04 when you order today!

X-Eleven Construction (PDF)
Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders' feedback.
The Aero Edge Spoiler dramatically reduces drag and lift coefficients, thus diminishing rider fatigue and increasing performance.
Offers unmatched ventilation with internal channels and exhaust ports throughout the helmet.
The Dual Air Charge system: A forehead lower intake and a forehead upper "Air Scoop II", combine to maximize flow-through ventilation.
Outlet holes in the Aero Edge Spoiler allow warm air to be exhausted.
The lower air intake provides an additional source of air flow.
The neck outlet vent allows for effective air exhaust.
Exhaled air is absorbed into the "Breath Chamber II" and exhausted by negative air pressure, thus eliminating shield fogging.
The entire interior liner (cheek pads, upper liner and chin strap cover) is easily removed to allow cleaning.
Each component of the inner liner is ergonomically designed to offer safety, fit and comfort.
Chin Strap clip neatly secures chin strap.
QRBP (quick Release Base Plate) allows toolless shield removal.
A wide, 3 Dimensionally curved shield offers increased peripheral vision and optical clarity.
Scratch resistant coating.
100% protection from harmful UV A & B rays.
A pre-set lever can easily lock the shield in place to prevent it from opening unexpectedly.
Snell 2000 and DOT approved.

Save $66.04 when you order today!

X-Eleven Construction (PDF)
Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders' feedback.
The Aero Edge Spoiler dramatically reduces drag and lift coefficients, thus diminishing rider fatigue and increasing performance.
Offers unmatched ventilation with internal channels and exhaust ports throughout the helmet.
The Dual Air Charge system: A forehead lower intake and a forehead upper "Air Scoop II", combine to maximize flow-through ventilation.
Outlet holes in the Aero Edge Spoiler allow warm air to be exhausted.
The lower air intake provides an additional source of air flow.
The neck outlet vent allows for effective air exhaust.
Exhaled air is absorbed into the "Breath Chamber II" and exhausted by negative air pressure, thus eliminating shield fogging.
The entire interior liner (cheek pads, upper liner and chin strap cover) is easily removed to allow cleaning.
Each component of the inner liner is ergonomically designed to offer safety, fit and comfort.
Chin Strap clip neatly secures chin strap.
QRBP (quick Release Base Plate) allows toolless shield removal.
A wide, 3 Dimensionally curved shield offers increased peripheral vision and optical clarity.
Scratch resistant coating.
100% protection from harmful UV A & B rays.
A pre-set lever can easily lock the shield in place to prevent it from opening unexpectedly.
Snell 2000 and DOT approved.

Save $18.56 when you order today!

Shell: Two shell sizes, SSL Karbon-Kevlar construction, Titanium Technology
Ventilation: IVS System: integrated ventilation system D-VES System: Double Vented EPS System
Padding: Fully removable and washable Cool Max½. Hygienic Treatment. Perspirant neck roll
Shield: Flat, moulded, anti-fog and anti-scratch polycarbonate shield with Tear Off
Shield: Mechanism Visor rotation mechanism without cover plates; Replacement of the visor without any tool (XQRS)
Retention: System Double D ring

Save $9.00 when you order today!

Most advanced racing helmet ever offered by AGV
Developed on the racetrack and in the wind-tunnel by World Champion Valentino Rossi
AGV is the first to introduce integrated Titanium-Technologies into racing helmets
Integrated Ventilation System (IVS) uses air vents of pure titanium set in channels hollowed directly into the helmet shell
Fresh air is continuously channeled through the inner shell and liner with the Double Vented EPS System (D-VES)
Using internal technical requirements with extensive comfort research, AGV created an EPS internal counter-shell
CoolMax^® technology keeps perspiration away, keeping you dry and comfortable; removable and washable
Double D-Ring retention system
Comes with both a clear shield (installed) and a mirrored shield
DOT/B.S.I. certified

Save $19.46 when you order today!

Shell: Two shell sizes, SSL Karbon-Kevlar construction, Titanium Technology
Ventilation: IVS System: integrated ventilation system D-VES System: Double Vented EPS System
Padding: Fully removable and washable Cool Max½. Hygienic Treatment. Perspirant neck roll
Shield: Flat, moulded, anti-fog and anti-scratch polycarbonate shield with Tear Off
Shield: Mechanism Visor rotation mechanism without cover plates; Replacement of the visor without any tool (XQRS)
Retention: System Double D ring

Save $19.46 when you order today!

Shell: Two shell sizes, SSL Karbon-Kevlar construction, Titanium Technology
Ventilation: IVS System: integrated ventilation system D-VES System: Double Vented EPS System
Padding: Fully removable and washable Cool Max½. Hygienic Treatment. Perspirant neck roll
Shield: Flat, moulded, anti-fog and anti-scratch polycarbonate shield with Tear Off
Shield: Mechanism Visor rotation mechanism without cover plates; Replacement of the visor without any tool (XQRS)
Retention: System Double D ring
Note: This helmet runs slightly small for the specified sizes.

Construction: Extreme Light Weight Bag Molded Kevlar/Fiberglass composite weave.
Weight: 2lbs, 13 oz.
3 Shell sizes to better insure proper fit.
16 Race replicas, 7 solids.
Sure Lock Visor Mechanism.
Unique EPS design to maximize ventilation and impact energy absorption.
Inner liner: removable adjustable and washable DuPont Terinda inner liner, removable and washable cheek pads.
Helmet standard: BSI 6658 Type A and DOT.
Available shields: Clear, Light Smoke, Dark Smoke, Iridium, Iridium Blue, Iridium Gold, Iridium Silver, Race Clear, Race Light Smoke, and Race Dark Smoke.
Only available in the Extreme Helmets: Alcantara Interior, Ram Air Intake, Air Wedge Top Diffuser, and Ultimate Graphics.

Construction: Extreme Light Weight Bag Molded Kevlar/Fiberglass composite weave.
Weight: 2lbs, 13 oz.
3 Shell sizes to better insure proper fit.
16 Race replicas, 7 solids.
Sure Lock Visor Mechanism.
Unique EPS design to maximize ventilation and impact energy absorption.
Inner liner: removable adjustable and washable DuPont Terinda inner liner, removable and washable cheek pads.
Helmet standard: BSI 6658 Type A and DOT.
Available shields: Clear, Light Smoke, Dark Smoke, Iridium, Iridium Blue, Iridium Gold, Iridium Silver, Race Clear, Race Light Smoke, and Race Dark Smoke.
Only available in the Extreme Helmets: Alcantara Interior, Ram Air Intake, Air Wedge Top Diffuser, and Ultimate Graphics.

Construction: Extreme Light Weight Bag Molded Kevlar/Fiberglass composite weave.
Weight: 2lbs, 13 oz.
3 Shell sizes to better insure proper fit.
16 Race replicas, 7 solids.
Sure Lock Visor Mechanism.
Unique EPS design to maximize ventilation and impact energy absorption.
Inner liner: removable adjustable and washable DuPont Terinda inner liner, removable and washable cheek pads.
Helmet standard: BSI 6658 Type A and DOT.
Available shields: Clear, Light Smoke, Dark Smoke, Iridium, Iridium Blue, Iridium Gold, Iridium Silver, Race Clear, Race Light Smoke, and Race Dark Smoke.
Only available in the Extreme Helmets: Alcantara Interior, Ram Air Intake, Air Wedge Top Diffuser, and Ultimate Graphics.

Construction: Extreme Light Weight Bag Molded Kevlar/Fiberglass composite weave.
Weight: 2lbs, 13 oz.
3 Shell sizes to better insure proper fit.
16 Race replicas, 7 solids.
Sure Lock Visor Mechanism.
Unique EPS design to maximize ventilation and impact energy absorption.
Inner liner: removable adjustable and washable DuPont Terinda inner liner, removable and washable cheek pads.
Helmet standard: BSI 6658 Type A and DOT.
Available shields: Clear, Light Smoke, Dark Smoke, Iridium, Iridium Blue, Iridium Gold, Iridium Silver, Race Clear, Race Light Smoke, and Race Dark Smoke.
Only available in the Extreme Helmets: Alcantara Interior, Ram Air Intake, Air Wedge Top Diffuser, and Ultimate Graphics.

Construction: Extreme Light Weight Bag Molded Kevlar/Fiberglass composite weave.
Weight: 2lbs, 13 oz.
3 Shell sizes to better insure proper fit.
16 Race replicas, 7 solids.
Sure Lock Visor Mechanism.
Unique EPS design to maximize ventilation and impact energy absorption.
Inner liner: removable adjustable and washable DuPont Terinda inner liner, removable and washable cheek pads.
Helmet standard: BSI 6658 Type A and DOT.
Available shields: Clear, Light Smoke, Dark Smoke, Iridium, Iridium Blue, Iridium Gold, Iridium Silver, Race Clear, Race Light Smoke, and Race Dark Smoke.
Only available in the Extreme Helmets: Alcantara Interior, Ram Air Intake, Air Wedge Top Diffuser, and Ultimate Graphics.

Construction: Extreme Light Weight Bag Molded Kevlar/Fiberglass composite weave.
Weight: 2lbs, 13 oz.
3 Shell sizes to better insure proper fit.
16 Race replicas, 7 solids.
Sure Lock Visor Mechanism.
Unique EPS design to maximize ventilation and impact energy absorption.
Inner liner: removable adjustable and washable DuPont Terinda inner liner, removable and washable cheek pads.
Helmet standard: BSI 6658 Type A and DOT.
Available shields: Clear, Light Smoke, Dark Smoke, Iridium, Iridium Blue, Iridium Gold, Iridium Silver, Race Clear, Race Light Smoke, and Race Dark Smoke.
Only available in the Extreme Helmets: Alcantara Interior, Ram Air Intake, Air Wedge Top Diffuser, and Ultimate Graphics.

Construction: Extreme Light Weight Bag Molded Kevlar/Fiberglass composite weave.
Weight: 2lbs, 13 oz.
3 Shell sizes to better insure proper fit.
16 Race replicas, 7 solids.
Sure Lock Visor Mechanism.
Unique EPS design to maximize ventilation and impact energy absorption.
Inner liner: removable adjustable and washable DuPont Terinda inner liner, removable and washable cheek pads.
Helmet standard: BSI 6658 Type A and DOT.
Available shields: Clear, Light Smoke, Dark Smoke, Iridium, Iridium Blue, Iridium Gold, Iridium Silver, Race Clear, Race Light Smoke, and Race Dark Smoke.
Only available in the Extreme Helmets: Alcantara Interior, Ram Air Intake, Air Wedge Top Diffuser, and Ultimate Graphics.

Construction: Extreme Light Weight Bag Molded Kevlar/Fiberglass composite weave.
Weight: 2lbs, 13 oz.
3 Shell sizes to better insure proper fit.
16 Race replicas, 7 solids.
Sure Lock Visor Mechanism.
Unique EPS design to maximize ventilation and impact energy absorption.
Inner liner: removable adjustable and washable DuPont Terinda inner liner, removable and washable cheek pads.
Helmet standard: BSI 6658 Type A and DOT.
Available shields: Clear, Light Smoke, Dark Smoke, Iridium, Iridium Blue, Iridium Gold, Iridium Silver, Race Clear, Race Light Smoke, and Race Dark Smoke.
Only available in the Extreme Helmets: Alcantara Interior, Ram Air Intake, Air Wedge Top Diffuser, and Ultimate Graphics.

Construction: Extreme Light Weight Bag Molded Kevlar/Fiberglass composite weave.
Weight: 2lbs, 13 oz.
3 Shell sizes to better insure proper fit.
16 Race replicas, 7 solids.
Sure Lock Visor Mechanism.
Unique EPS design to maximize ventilation and impact energy absorption.
Inner liner: removable adjustable and washable DuPont Terinda inner liner, removable and washable cheek pads.
Helmet standard: BSI 6658 Type A and DOT.
Available shields: Clear, Light Smoke, Dark Smoke, Iridium, Iridium Blue, Iridium Gold, Iridium Silver, Race Clear, Race Light Smoke, and Race Dark Smoke.
Only available in the Extreme Helmets: Alcantara Interior, Ram Air Intake, Air Wedge Top Diffuser, and Ultimate Graphics.